Dome Light Control; Silent Mode - Viper 3105V Owner's Manual

Location of Valet Button_________________________________
Number of Pulses______________________________________
The unit responds to one to five pulses of the Valet button when dis-
arming. Check with your installer to discuss how you want the system
configured.
Note: As a precaution, if programmed for passive arming the system
should be placed into Valet Mode until a remote is available.

Dome light control

Security only
The dome light activates for 30 - seconds after the system is disarmed.
Ignition controlled
The dome light activates for 30 - seconds after the ignition is turned
Off. (may be programed to On or Off, by the dealer installer)

Silent mode

To temporarily turn off the arm or disarm chirps, use Silent Mode.
Press AUX for less than one second before arming or disarming, and
the confirmation chirp(s) will be eliminated for that one op er a tion only.
If you want the arm/disarm chirps turned off permanently, your dealer
can do this for you.
The Warn Away response to lighter impacts is bypassed if the system
is armed using Silent Mode. This ensures that no chirps will be emitted
by the siren in an area you want chirp-free. The system is still capable
of triggering, but the Warn Away response is bypassed.
12 © 2012 Directed. All rights reserved.