LG Pro Centric 32LP645H Commercial Mode Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. Centric 32LP645H
  6. Commercial mode setup manual
LG Pro Centric 32LP645H Commercial Mode Setup Manual

LG Pro Centric 32LP645H Commercial Mode Setup Manual

Lodging guest interactive pro:centric tvs
Hide thumbs Also See for Pro Centric 32LP645H:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
© Copyright 2013 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
32LP645H
47LP645H
39LP645H
55LP645H
42LP645H
60LP645H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 11 – 17
Custom Master TV Setup
pages 29 – 32
FTG Mode of Operation
pages 43 – 44
P/N: 206-4232 (Rev B)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG Pro Centric 32LP645H

Summary of Contents for LG Pro Centric 32LP645H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 11 – 17 Custom Master TV Setup pages 29 – 32 FTG Mode of Operation pages 43 – 44 P/N: 206-4232 (Rev B) © Copyright 2013 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 17. Power Cord Caution: It is recommended that appliances be placed Keep these instructions. upon a dedicated circuit; that is, a single outlet circuit Heed all warnings. which powers only that appliance and has no additional outlets or branch circuits.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Do not touch the ventilation openings, as they may become (Continued from previous page) hot while the TV is operating. 22. Outdoor Antenna Grounding 27. If you smell smoke or other odors coming from the TV or If an outside antenna or cable system is connected to the hear strange sounds, unplug the power cord, and contact an product, follow the precautions below.

  • Page 5: Table Of Contents

    Downloading a Splash Screen using a USB Memory LG Smart Install Utility......18 – 19 Device......... 56 Installer Menu .

  • Page 6: Commercial Mode Overview

    ® This document describes how to set up LP645H Pro:Centric TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translator Card (PTC), or embedded b-LAN™ (EBL) module, or it resides externally from the TV (i.e., in a device from the solution provider).

  • Page 7: Tv Setup Menus

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required. If xxLP645H PTC INSTALLER MENU CPU-CTV necessary, familiarize yourself with the Installer Menu and how to make and save changes.

  • Page 8: Ftg Mode

    Once it is determined whether the TV CPU or the EBL will own the FTG Channel Map, configuration can begin. Configuration of either requires a PC application—the LG FTG File Manager for the TV CPU or the LG FTG Device Configuration Application for the EBL. Each application provides utilities that enable you to create/edit an FTG Channel Map and configure Installer Menu settings.

  • Page 9: Pro:centric Operation

    The Pro:Centric server Admin Client web editor/content wizard is provided for customer configuration of portal messages and billboards/maps. Note: Customized content is typically defined by the service integrator and/or hotel administrators. LG does not provide hotel-specific content. Pro:Centric Interactive Menu Navigation Use the Pro:Centric TV remote control to operate both interactive menus and regular TV features.

  • Page 10: Pro:centric Setup

    Pro:Centric Operation (Cont.) Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be specified on the TVs. On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/ administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the Pro:Centric application.

  • Page 11: Ez-Manager Wizard

    Welcome level or beyond) to use the LG Smart Install utility to perform USB configuration functions. Any file(s) you wish to use for configuration purposes must be stored in a folder named “LGSMARTINSTALL” in the root directory of the USB memory device. See “LG Smart Install Utility” on pages 18 to 19 for further information.

  • Page 12: Initiate Configuration Or Exit The Ez-Manager Wizard

    “Exit” option from the subsequent screen(s). Note: As indicated on the previous page, you may use the LG Smart Install feature to configure the TV using a USB memory device at any time while the EZ-Manager Wizard is in progress.

  • Page 13: Tv Configuration Options

    Menu. See “USB Configuration” on page 17 for further information. Note: If you have already inserted a USB memory device with the intent to use the LG Smart Install utility and the Integrated USB Downloading screen is on display, you may still set the Zoning feature on this TV by selecting Previous to return to the EZ-Manager/TV Configuration Options screen.

  • Page 14: Zone And Room Number Assignments

    Menu to complete the configuration, continue to “USB Configuration” on page 17. • If you wish to use a USB memory device in conjunction with the LG Smart Install utility to complete the configuration, see “LG Smart Install Utility” on pages 18 to 19.

  • Page 15: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “Next” from the TV Configuration Options screen, EZ-Manager Wizard the Searching for Pro:Centric Server screen is displayed (see example at right), and you have the following options: Searching for Pro:Centric Server... •...
  • Page 16 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, EZ-Manager Wizard use the arrow keys on the Installer Remote to select/highlight Pro:Centric Manual Configuration the Manual Pro:Centric option at the bottom right of the <...

  • Page 17: Usb Configuration

    EZ-Manager Wizard (Cont.) USB Configuration Before you begin, note the following: • Each of these functions requires that you have the appropriate file(s) loaded on a USB memory device. If you wish to perform a software upgrade from the USB Download Menu, the software upgrade files must be stored in a folder named “LG_DTV”...

  • Page 18: Lg Smart Install Utility

    LG Smart Install Utility LG Smart Install is a new utility that enables you to configure the TV or update multiple TV configuration elements at one time using files loaded on a USB memory device. You may use LG Smart Install to download any one or all of the following to a TV: an FTG Configuration (.tlx) file, a .tlx file for cloning purposes (no Channel Map), a TV or PTC software update, a splash screen image.

  • Page 19: Lg Smart Install Utility

    LG Smart Install Utility (Cont.) (Continued from previous page) 2. To access the LG Smart Install utility Integrated USB Down- USB LG Smart Install Utility loading screen from the TV menus: Integrated USB Downloading • Press MENU SETTINGS on the Installer Remote to display Select the configuration file(s) to download, and then select ‘Next’.

  • Page 20: Installer Menu

    Use the Installer Menu to set up, change, or view operational settings. This section describes how to access, use, and exit the Installer Menu from the TV itself; however, you should also refer to the Installer Menu descriptions in this document if you are configuring the TV using LG’s FTG configuration software.

  • Page 21: Using The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Map in CPU CPU-FTG FTG Mode via CPU...
  • Page 22 Installer Menu (Cont.) Installer Menu Items 000 through 075 Menu Function Value Range Default Value Brief Description of Function Item INSTALLER SEQ 0 ~ 3 Leave default set to 0. POWER MANAGE 0 ~ 7 Sets number of hours of no activity before automatic shutoff. AC ON 0 / 1 Set to 1 to enable TV to turn ON when AC power is applied.
  • Page 23 Installer Menu (Cont.) Installer Menu Items 078 through 122 Menu Function Value Range Default Value Brief Description of Function Item UPN MSB 0 ~ 255 User programmable number, most significant byte. UPN MSB-1 0 ~ 255 User programmable number, most significant byte - 1. UPN MSB-2 0 ~ 255 User programmable number, most significant byte - 2.
  • Page 24 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items NOTE: For items 007, 008, and 009 000 - INSTALLER SEQUENCE For legacy reasons, the scale used is 0 – 63. The PTC software Specifies entry sequence to the Installer Menu. will translate this to the 0 –...
  • Page 25 Installer Menu (Cont.) 015 - SLEEP TIMER 030 - ACK MASK If set to 1, the Sleep Timer feature may be used. If set to 0, the MPI Communication Parameter. When set to 1, enables ACK Sleep Timer is not available. feature of MPI.
  • Page 26 Installer Menu (Cont.) 046 - STRT AUX SRCE (Start Aux Source) 078 - UPN MSB (UPN Most Significant Byte) Sets the starting Aux source. When turned ON, the TV will tune to User programmable number, most significant byte readable by starting Aux source if item 004 STRT CHANNEL is set to 0.
  • Page 27 Installer Menu (Cont.) 092 - HDMI3 ENABLE 097 - AUDIO OUTPUT Set to 1 to enable HDMI 3 input in DTV Mode. Set to 2 to enable Determines availability and signal type/level (fixed speaker, HDMI 3 input in PC Mode. Set to 0 to disable display panel HDMI variable speaker, or fixed line level [amplifier]) of the audio output 3 input.
  • Page 28 Installer Menu (Cont.) 104 - START MINOR CHANNEL For TVs in Pass-through Mode or FTG Mode via CPU, if this item Sets Minor Start Channel number at power up. 0 = NTSC. If not is left at its default value (255), the TV’s Data Channel Auto Search 0, number selected is the digital channel’s Minor Start Channel feature will be enabled (see additional information below).

  • Page 29: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. Note: Cloning requirements and procedures are described in detail on pages 34 to 42. Refer to “FTG Mode of Operation Overview”...

  • Page 30: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. If the EZ-Manager Wizard appears on the screen when you turn ON the TV, use the arrow keys on the Installer Remote to select Exit from the Welcome screen and press OK. In the confirmation pop-up window, select OK, and then press OK once more on the Installer Remote to exit the wizard.
  • Page 31 Custom Master TV Setup (Cont.) (Continued from previous page) Note: If you intend to use a USB memory device / .tlx file for cloning purposes, and you wish to use the TV Zoning feature, make sure to assign a TV Zone # at this time as described in Reference section, “Using the TV Zoning Feature.”...
  • Page 32 Custom Master TV Setup (Cont.) (Continued from previous page) 5. (PTC cloning only) Transfer the TV setup menu settings to the commercial controller (PTC): 2-5-5 + MENU Mode Note: This step is essential for successful cloning using a USB memory device / .tll file or a clone programmer.

  • Page 33: Menu Mode)

    Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing Channel Icons and/or Adding or Editing Changing icons and/or adding or editing custom text labels Custom Text Labels in the Channel-Time Display can only be done if there are channels that have been transferred to the TV’s PTC either during Master TV Setup If there is no pre-assigned icon for a channel, you can add (see pages 29 to 32) or by cloning.

  • Page 34: Cloning Overview

    Cloning Overview IMPORTANT CLONING INFORMATION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 29): • Using a USB memory device / .tlx file • Using a USB memory device / .tll file •...

  • Page 35: Usb Cloning Procedures

    USB Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 34 before beginning any cloning procedures. In particular, ensure that the Master TV Setup does not contain a Channel Map;...
  • Page 36 Teaching process via the EZ-Manager Wizard (see “USB Configuration” on page 17) or using the LG Smart Install utility (see “LG Smart Install Utility” on pages 18 to 19). To continue with this procedure, exit the wizard: Use the arrow keys on the Installer Remote to select Exit from the Welcome screen and press OK.

  • Page 37: Learning / Teaching A Master Tv Setup Using A Usb Memory Device / .Tll File

    USB Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using a USB Memory Device / .tll File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 34 before beginning any cloning procedures. • You may edit the filename as part of the Learning procedure; however, a file with edited contents will not be recognized.

  • Page 38: Usb Cloning Procedures

    USB Cloning Procedures (Cont.) Teach Master TV Setup to Target TV 1. Turn ON the Target TV. The next step depends on whether the EZ-Manager Wizard appears on the screen: • If the wizard is displayed, the TV is in the required factory default state. If desired, you can complete the Teaching process via the EZ-Manager Wizard (see “USB Configuration”...

  • Page 39: Clone Programmer Cloning Procedures

    Clone Programmer Cloning Procedures Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Caution: If the TV is in LodgeNet PPV Mode or FTG Mode via EBL (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer.
  • Page 40 (5) DISPLAY TV SETUP Since the TLL-1100A’s time cannot be set directly, the current time needs (6) DISPLAY CLONE SETUP to be copied from an LG TV equipped with an enabled MPI port. CLONE CLOCK = XX:XX CLOCK = XX:XX After the time is copied to the TLL-1100A clone programmer, the current THE CLONE IS VERSION VX.X.X...

  • Page 41: Learning / Teaching A Master Tv Setup Using An Lt2002 Clone Programmer

    Clone Programmer Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using an LT2002 Clone Programmer Caution: If the TV is in LodgeNet PPV Mode or FTG Mode via EBL (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer.

  • Page 42: Clone Programmer Cloning Procedures

    Since the LT2002’s time cannot be set directly, the current time needs to be TO CHANGE MENU ITEMS, PRESS copied from an LG TV equipped with an enabled MPI port. CHANNEL KEYS OR DIGITS. After the time is copied to the LT2002 clone programmer, the current time will be TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER.

  • Page 43: Ftg Mode Of Operation Overview

    • Pro:Centric data delivery over RF. • TV Zoning option for location-specific configuration. FTG Mode via EBL requires that you use LG FTG Device Configuration Application PC software to configure the EBL. FTG Mode via CPU requires that you use LG FTG File In this mode, the EBL is the owner of the FTG Channel Map Manager PC software to create an FTG Configuration (.tlx)

  • Page 44: Determining The Tv Operating Mode

    FTG Mode of Operation Overview (Cont.) While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • Any FTG configuration changes must be made using either the FTG File Manager (FTG Mode via CPU) or the FTG Device Configuration Application (FTG Mode via EBL).

  • Page 45: Ftg Mode Via Cpu

    FTG Mode via CPU Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration file using the FTG File Manager.
  • Page 46 FTG Mode via CPU (Cont.) (Continued from previous page) Note: To remove an individual item from the FTG Configuration List or the TV Setup Menu List, click on/ highlight the item to be removed, and then click the Remove Item button directly above the applicable “List”...

  • Page 47: Teaching Ftg Configuration To A Tv

    • If the EZ-Manager Wizard appears on the screen when you turn ON the TV, you can complete the Teaching process via the wizard (see “USB Configuration” on page 17). • You may also use the LG Smart Install utility to complete this process. See “LG Smart Install Utility” on pages 18 to 19 for further information.

  • Page 48: Learning Ftg Configuration From A Tv

    FTG Mode via CPU (Cont.) Learning FTG Configuration from a TV To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG Configuration file using the FTG File Manager as described on pages 45 to 46. However, if necessary, this option enables you to save (Learn) an FTG Configuration file from an LP645H TV to a USB memory device.

  • Page 49: Optional Manual Configuration / Tv Setup

    FTG Mode via CPU (Cont.) Optional Manual Configuration / TV Setup The manual configuration procedures below should only be performed if you do not know the RF channels at the site and need to “Learn” FTG Configuration from an LP645H TV as described on the previous page. Ensure the TV is in Pass-through Mode before you begin.

  • Page 50: Ftg File Manager Utilities Overview

    FTG File Manager Utilities Overview FTG File Manager Main Screen The FTG File Manager main screen enables you to compile, modify, and save FTG Configuration (.tlx) files. It also allows you to assign a Zone designation to each Installer Menu profile, if desired (see Reference section, “Using the TV Zoning Feature,”...

  • Page 51: Ftg Channel Map Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. PRINT MAP EDIT/ADD MAP Click to open the FTG Click to display a printable Channel Map Editor to create FTG Channel Map Report.

  • Page 52: Ftg Channel Map Editor

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. LOGICAL CHANNEL MAPPING CUSTOM CHANNEL LABELS/ICONS SET CHANNEL ATTRIBUTES Select a Logical Channel number. Then, Enter custom labels and select icons Check/select Encrypted, OSD, assign the RF, Major, and Minor channel...

  • Page 53: Ftg Installer Menu Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Installer Menu Configuration Utility CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. Filename of opened FTG Configuration (.rml) file created using FTG Device Configuration Application. Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters.

  • Page 54: Remote Jack Pack / Tv Connections & Setup

    Reference: Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 1).

  • Page 55: Device

    The following procedure describes how to update TV/PTC software using the USB Download Menu, though you may also use the new LG Smart Install utility to upgrade software, if desired. See “LG Smart Install Utility” on pages 18 to 19 for further information.

  • Page 56: Device

    LOGO Image Download Teach To TV (TLX) Splash I the USB Download Menu, though you may also use the new LG Smart Install utility to download the splash image, if desired. See “LG Smart Install Utility” on Previous pages 18 to 19 for further information.

  • Page 57: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 32LP645H 39LP645H 42LP645H 47LP645H Item 099 Back Power...

  • Page 58: Power Consumption Settings

    Reference: Power Consumption Settings (Cont.) 55LP645H 60LP645H Item 099 Back Power Power Percent Percent Lighting Consumption Consumption Savings Savings (Static) (Watts) (Watts) 95.3 101.3 88.9 98.9 84.5 96.9 81.1 95.5 78.7 94.5 74.6 91.9 70.4 87.8 60.3 74.1 50.6 60.5 40.3 46.3 31.2...

  • Page 59: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS Installer STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Menu Item Installer Menu 0x41 SOURCES CURRENT AV 046 START ENABLED (R/W) SOURCE (R) SOURCE (R) AUX SRCE (Start Aux Installer...

  • Page 60: B-Lan Setup & Overview

    3 (default) A b-LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device.

  • Page 61: Ftg Mode Via Ebl (Local Configuration)

    Reference: FTG Mode via EBL (Local Configuration) The following steps outline local FTG configuration of individual TV EBLs using a direct PC-to-TV connection. Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for further information. FTG Device Configuration Application software is available online at: www.LGsolutions.com/ftgsoftware. Note: If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings.

  • Page 62: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the table on the following page.

  • Page 63: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature (Cont.) Inputs Item 042 Installer Menu Value Display HDMI 1 HDMI 2 HDMI 3 Enabled Disabled Disabled Disabled Disabled DDDDXXX0 Disabled Enabled Disabled Disabled Disabled DDD4XXXD Enabled Enabled Disabled Disabled Disabled DDD4XXX0 Disabled Disabled Disabled Disabled Enabled DD5DXXXD...

  • Page 64: Rjp Model List & Input Auto-Sensing Hierarchy

    Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Legacy Models • RJP-101M • RJP-110WBR • RJP-101ML • RJP-110S • RJP-110F • RJP-120G • RJP-110FW • RJP-120T • RJP-110W • RJP-201B/202B RJP Scaler Models • RJP-201M • RJP-301B • RJP-401B RJP Input Auto-sensing Hierarchy Priority Video...

  • Page 65: Restoring Factory Defaults On The Tv(S)

    Reference: Restoring Factory Defaults on the TV(s) This section describes how to restore factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- through Mode.

  • Page 66: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature This section describes the TV Zoning feature available with the LP645H model TVs. The TV Zoning feature enables you to create localized configurations for TVs in selected locations, or “Zones,” within the installation environment. This feature is primarily intended for use when the TV is configured for FTG Mode via CPU operation.
  • Page 67 Reference: Using the TV Zoning Feature (Cont.) At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may opt to configure Zone restrictions for selected channels in the FTG Channel Map, but at the same time, you can choose to configure all TVs at the site with the same Installer Menu and/or TV Setup Menu settings.

  • Page 68: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature (Cont.) (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV. Use the Up/Down arrow keys to select the applicable label. • Room Number: Allows you to specify the number of the room in which the TV is located. You can use the number keys on the Installer Remote to direct enter a room number.

  • Page 69: Lp645H Rear And Side Jack Panels

    Reference: LP645H Rear and Side Jack Panels HDMI/DVI IN OPTICAL AUDIO OUT Connection for HDMI/DVI Use for amps and home theater systems. output from external device. Note: When the TV is OFF, this port is not enabled. AUDIO/VIDEO IN UPDATE Connection for composite audio/ Restricted to software updates.

  • Page 70: External Stereo Speaker Setup

    Reference: External Stereo Speaker Setup EXTERNAL SPEAKER_R- (Sleeve) The three-contact (left, right, ground) SPEAKER OUT 3.5 mm jack on the LP645H rear panel provides EXTERNAL SPEAKER_R+ (Ring 2) stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external EXTERNAL SPEAKER_L- (Ring 1) audio equipment.

  • Page 71: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 72: Troubleshooting

    IR path to TV’s receiver obstructed. Remove obstructions. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible Installer Remote. Contact your LG dealer. 206-4232...

  • Page 73: Commercial Mode Check / Ftg Operation Troubleshooting

    Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU on the...

  • Page 74: Clone Programmer Troubleshooting

    Then redo Learn/Teach. (Learning usually takes about 90 seconds; Teaching usually takes 3 to 4 minutes.) Remote does not operate Wrong Installer Remote. Only use an LG Installer Remote to operate clone programmer clone programmer. with TV. Clone menu does not dis- MPI cable not connected.

  • Page 75: Glossary Of Terms

    May be accomplished using either a USB Refers to a particular commercial mode of assure rapid, broad deployment of HDTV memory device (available on select mod- operation within an LG TV. See also FTG and other high-value digital content. els) or clone programmer. Mode.

  • Page 76: Document Revision History / Open Source Software Notice 76

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.
  • Page 77 Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a registered trademark of LG Electronics Inc. b-LAN is a trademark of LodgeNet Interactive Corporation. All other trademarks or registered trademarks are the property of their respective owners.

This manual is also suitable for:

Pro centric 42lp645hPro centric 39lp645hPro centric 47lp645hPro centric 55lp645hPro centric 60lp645h

Table of Contents