Table of Contents
Advertisement
OPERATION
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press BAND button (20)
shortly to select the desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3 → MW1→ MW2
SELECTING STATION
Press
button (3) or
shortly to activate automatic seek
function. Press for several seconds until
"MANUAL" appears on the display, the
manual tuning mode is selected. If both
buttons have not been pressed for
several seconds, they will return to seek
tuning mode and "AUTO" appears on
the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AMS button (6) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished. And then 6 strongest
stations
are
corresponding preset number button.
- Program scanning
Press AMS button (6) shortly to scan
preset station. The radio is holding at
that preset number for several
seconds with release mute, then
searches again.
STATION STORING
To received a station, Press one of the
preset button (1~6) for 2 seconds.
current station is stored into the number
Button.
button (23)
stored
into
the
USB PLAY OPERATION
On the front panel of the unit, there is an
USB interface (11). You can connect an
USB driver through this interface (11).
When you connect an USB driver through
the interface, the unit will search the MP3
files or WMA files in the USB driver and
start to play MP3 files or WMA files
automatically. If in other mode, you can
also press MODE button (4) to select USB
mode.
It supports the MP3/WMA file in the device,
the operation please refer to the following
instruction.
SELECTING SONGS IN SINGLE STEP
Press
button (3) or
move to the following song or the previous
song. Track number shows on display.
SELECTING DIRECTORY UP/DOWN
Press 5 DIR-button (15) or 6 DIR+button (14) to
select previous directory or next directory.
PAUSING PLAYING
Press 1 PAU button (19) to pause playing.
Press it again to resume playing.
PREVIEWING ALL FILES
Press 2 INT button (18) to INTRO each file.
Shortly press again to stop intro and start to
play.
REPEATING PLAYING
Press 3 RPT button (17) to continuously
repeat the same file. Press it again to
repeat all files.
PLAYING IN RANDOM ORDER
Shortly press 4 RDM button (16) to play all
files in random order. Press it again to
cancel the function.
SD/MMC OPERATION
There is a SD/MMC interface (10) on the
front panel of the unit.
When you insert a SD/MMC card in the
10
button (23) to
Advertisement
Table of Contents
