Power Management - Gigabyte GA-B85M-HD3 User Manual

Table of Contents

Advertisement

2-6

Power Management

& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
& Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Press the power button and then the system will be turned off instantly. (Default)
Instant-Off
Delay 4 Sec
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
& RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Enabled)
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Always Off
The system stays off upon the return of the AC power. (Default)
Always On
The system is turned on upon the return of the AC power.
The system returns to its last known awake state upon the return of the AC power.
Memory
& Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disables this function. (Default)
Disabled
Any Key
Press any key to turn on the system.
Keyboard 98
Press POWER button on the Windows 98 keyboard to turn on the system.
Set a password with 1~5 characters to turn on the system.
Password
- 31 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents