Olympus TG-630 Instruction Manual page 4

Inserting and removing the
battery and card (commercially
available)
1
Follow Steps 1, 2 and 3 to
open the battery/card cover.
3
Battery/card cover latch
1
Battery/card cover
Turn off the camera before opening the battery/
card cover.
2
Insert the battery while sliding the
battery lock knob in the direction
of the arrow.
Insert the battery as illustrated with the B mark
toward the battery lock knob.
Damage to the battery exterior (scratches, etc.)
may produce heat or an explosion.
4 EN
2
Lock knob
Battery lock knob
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
3
Insert the card straight until it
clicks into place.
Always use SD/SDHC/SDXC/Eye-Fi/FlashAir
(with Wireless LAN function) card with this
camera. Do not insert other types of memory
cards. "Using the card" (p. 71)
● Do not touch the metallic parts of the card directly.
To remove the card To remove the card
1
Press the card in until it clicks and comes out slightly,
then remove the card.
Write-protect switch
2