Removing The Cpu - eMachines E627 Service Manual

Service guide
Hide thumbs Also See for E627:
Table of Contents

Advertisement

Removing the CPU

IMPORTANT: The pins on the underside of the CPU are very delicate. If they are damaged, the CPU may
malfunction. Place the CPU on a clean, dry surface when it is not installed.
1. See "Removing the Thermal Module" on page 74.
2. Using a flat-bladed screw driver, rotate the CPU locking screw 180° counter-clockwise as shown.
3. Lift the CPU clear of the socket as shown.
78
Chapter 3

Advertisement

Table of Contents
loading

Table of Contents