Replacing The Odd Module; Replacing The Lower Covers - eMachines E627 Service Manual

Replacing the ODD Module

1. Press the bezel into the tray, bottom edge first, to
secure it to the ODD Module.
3. Push the ODD Module into the ODD bay until it is
flush with the casing.

Replacing the Lower Covers

1. Replace the Memory Cover as shown.
IMPORTANT: Press down around the perimeter of the covers to ensure that the all the securing tabs are
correctly located in the casing.
Chapter 3
2. Secure the ODD bracket with the two screws.
4. Replace the single screw to secure the Module.
2. Replace the HDD Cover as shown.
117