Removing The Nüvi And Mount; Mounting On Your Dashboard; Nümaps Guarantee - Garmin nuvi 1200 Owner's Manual

Removing the nüvi and
Mount
To remove the nüvi from the cradle,
press the tab of the cradle while
tilting the nüvi forward.
To remove the cradle from the
mount, turn the cradle to the right or
left. Apply pressure in that direction
until the cradle snaps off the mount.
To remove the suction cup mount
from the windshield, flip the lever
toward you. Pull the tab on the
suction cup toward you.
Mounting on Your
Dashboard
Use the enclosed mounting disk to
mount your unit to the dashboard and
comply with certain state regulations.
nüvi 1200/1300/1400 Series Owner's Manual
iMPortaNt: The permanent
mounting adhesive is extremely
difficult to remove after it is
installed.
1. Clean and dry the dashboard
where you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the
disk.
3. Place the disk on the dashboard.
4. Remove the clear plastic cover
from the top of the disk.
5. Place the suction cup mount
on top of the disk. Flip the lever
down (toward the disk).
nüMaps Guarantee
To receive one free map update
(if available), register your nüvi at
http://my.garmin.com
of acquiring satellites and driving
with your nüvi. You are not eligible
for the free map update if you
register by phone or wait longer than
Appendix
™
within 60 days
4