Calibrating The Screen; Updating The Software; Clearing User Data; Battery Information - Garmin nuvi 1200 Owner's Manual

Calibrating the Screen

If the touchscreen is not responding
properly, calibrate the touchscreen.
1. Turn off the nüvi.
2. Press and hold the
for about 30 seconds until the
calibration screen appears (white
screen with "Press dot").

Updating the Software

1. Connect the nüvi to your
computer using the mini-USB
cable. The AutoPlay menu opens.
2. Double-click on
myGarmin Agent download
page. If the AutoPlay menu does
not open, or you are on a Mac
computer, go to
.com/agent.
3. Follow the on-screen instructions.
After you have installed myGarmin
Agent, you will be prompted to
open myDashboard when you
connect your nüvi to your computer.
nüvi 1200/1300/1400 Series Owner's Manual
Power button
to open the
www.garmin
myDashboard checks your nüvi
for current software and provides
additional information about your
nüvi.

Clearing User Data

iMPortaNt: This deletes all
user-entered information.
1. Hold your finger on the lower-right
corner of the nüvi screen while
turning on the nüvi.
2. Keep your finger pressed until the
pop-up window appears.
3. Touch Yes to clear all user data.
All original settings are restored.
Any items that you have saved are
erased.

Battery Information

To maximize the lifetime of the
battery, do not leave your nüvi in
direct sunlight, and avoid prolonged
exposure to excessive heat.
Appendix
4