Configuring The Wlan; Connecting To A Network - Fujitsu LifeBook UH572 User Manual

Configuring the WLAN

The WLAN device can be configured to establish wireless network connectivity using the software that is built into
Windows Vista. Support for most industry standard security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these
parameters:
From the Modern Start screen, press [Windows]+[X], then select Control Panel from the menu.
1
If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and
2
Sharing Center icon.
Select "Setup a new connection or network".
3
Depending upon what type of connection you would like to make, make a selection. For an infrastructure network,
4
select "Manually connect to a wireless network".
Enter the required information. It may be necessary to consult with your network administrator for some of the
5
information.
In the event you require assistance, go to the Network and Sharing Center window (Control Panel > Network and
6
Sharing Center), and type in relevant keywords in the Search box.

Connecting to a Network

After you have configured your computer, you can connect to an active network by performing the following steps:
Click on the WLAN icon in the system tray.
1
Select "Connect to a network".
2
Select a network from the list that appears, and click the [Connect] button.
3
99 - Before Using the Wireless LAN