Using The Compass; Using Sight 'N Go - Garmin GPSMAP 62STC Owner's Manual

Using the Main Pages

Using the Compass

You can use the compass to navigate an
active route.
1. Press PAGE.
2. Hold the device level.
3. Follow the
your destination.

Using Sight 'N Go

NOTE: Sight 'N Go is available only
with the GPSMAP 62s, GPSMAP 62st,
GPSMAP 62sc, and GPSMAP 62stc.
You can point the device at an object in
the distance, such as a lighthouse, lock
in the direction, and then navigate to
the object.
1. From the main menu, select Sight
'N Go.
2. Point the device at an object.
3. Select Lock Direction > Set
Course.
14
bearing pointer to
4. Use the compass to navigate to the
object.
Compass Setup Options
From the compass, press MENu, and
select Setup Heading.
• Display—shows the type of
directional heading on the compass:
◦ Directional Letters—sets the
compass reading to directional
letters (N, S, E, W).
◦ Numeric Degrees—sets the
compass reading to degrees
(0°–359°).
◦ Mils—sets the compass reading
to mils (0 mils–6399 mils).
• North Reference—sets the north
reference of the compass:
◦ True—sets true north as the
heading reference.
◦ Magnetic—automatically sets
the magnetic declination for
your location.
GPSMAP 62 Series Owner's Manual