Daikin FTXS25BVMA Operation Manual page 9

Inverter
Hide thumbs Also See for FTXS25BVMA:
Table of Contents

Advertisement

Preparation Before Operation
I To operate the remote
controller
• To use the remote controller, aim the transmitter
at the indoor unit. If there is anything to block
signals between the unit and the remote control-
ler, such as a curtain, the unit will not operate.
• Do not drop the remote controller. Do not get it wet.
• The maximum distance for communication is
about 7 m.
I To fix the remote controller
holder on the wall
1. Choose a place from where the
signals reach the unit.
2. Fix the holder to a wall, a pillar, or
similar location with the screws
procured locally.
3. Place the remote controller in the
remote controller holder.
ATTENTION
I I I I About remote controller
• Never expose the remote controller to direct sunlight.
• Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.
• Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as
inverter-type lamps) is in the room. Consult the shop if that is the case.
• If the remote controller signals happen to operate another appliance, move that appliance to some-
where else, or consult the shop.
8
Remote controller
holder
Set.
G
To remove, pull it upwards.
Receiver

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftxs35bvma

Table of Contents