Heading Setup; Calibration Setup - Garmin GPSMAP 60CSx Owner's Manual

Heading Setup

Use the Heading Setup Page to specify the type of
heading display and the type of North reference used
to calculate your heading.
Note: Unless you have a working knowledge
of headings and North referencing, it is
recommended that you use the default values.
To access the Heading Setup Page:
On the Setup Menu Page, highlight the
Heading icon, and press ENTER.
• Display—sets the value (Cardinal Letters,
Degrees, or Mils) to show your heading.
GPSMAP 60CSx Owner's Manual
M M > h
AIn enu eAdIng
• North Reference—provides headings based
on a true, magnetic, grid, or specific user value
north reference.
• Switch to compass heading when below:
(for more than)—sets speed and time delay for
electronic compass switching. See

Calibration Setup

The Calibration Setup Page allows you to calibrate
the compass and altimeter for increased accuracy in
navigation.
To calibrate the compass:
1. On the Setup Menu Page, highlight the
Calibration icon, and press ENTER. The
"Which sensor would you like to calibrate?"
message appears.
2. Highlight the Compass button, and press
ENTER to open the Compass Calibration
Page. Follow the instructions on
To calibrate the Altimeter:
Highlight Altimeter and press ENTER to
display the Altimeter Calibration Page. Follow
the instructions on
s - c s
etuP AlIbrAtIon
page 49.
page 50.
page 61.
etuP