NOTE: See page 13, 14, 15 and 16 for instructions
on how to connectLP tank to grill, how to light grill
and how to check for Gas leaks.
1. Adjust the Adjusting Arm Handle to High
position.
See Figure
1.
2. Close all of the Air Vents on the Rear of the
Grill Bowl. See Figure
2.
3. Before igniting burners, inspect for charcoal
ashes. Remove and empty Charcoal Tray. With
a small hand-broom,
sweep ashes away from
burners and into Grease Tray below.
4. Important:
Before operating LP gas function,
you must slide the Charcoal Tray back into the
Tray Support in the Grill Bowl. See Figure
3.
The clean Charcoal Tray sitting above the
burners now functions
as a gas Flame Tamer
and heat distributor.
Figure 3
CHARCOAL
TRAY
SUPPORT
\
CHARCOAL
TRAY