Yamaha F25 Owner's Manual page 70

Operation
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
64
" 3. Push the tilt support knob into the clamp
bracket
WARNING! After tilting the outboard
motor, be sure to support it with the
tilt support knob or tilt support lever.
Otherwise the outboard motor could
fall back down suddenly if oil in the
power trim and tilt unit or in the pow-
er tilt unit loses pressure.
NOTICE: Do not use the tilt support
lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
UP
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 69.
ZMU06537
4. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
to support the
[ECM01641]
engine.
[EWM00262]
ZMU06543