Page 1
Mode d’emploi (FR) Bedienungsanweisung (GER) Mode de Emploi (ITA) MODEL: Country Voltage WAV IFA - 10125060 Australia 240V WAV IFB - 10125070 Britain 230V WAV IFE - 10125080 Europe 230V WAV IFOB - 10125090 Britain 230V Beginning with Serial No. 1000039231 Read instructions before operating the machine.
MACHINE DATA LOG Warranty Registration Thank you for purchasing a Windsor product. Warranty registration is quick and easy. Your registration will allow us to serve you better over the lifetime of the product. To register your product go to: www.windsorind.com/WarrantyRegistration.aspx...
TABLE OF CONTENTS (ENG) Machine Data Log.........2 Table of Contents..........3 HOW TO USE THIS MANUAL How to use this Manual.........1-1 SAFETY Important Safety Instructions…………...2-1ENG Hazard Intensity Level…………………..2-2ENG Grounding Instructions………………….2-3ENG OPERATIONS Controls………………………………...…3-1ENG Machine Operation……………….……...3-2ENG Set Up…………………………….…….3-2ENG Operation……………………………..3-3ENG Cleaning………………………………...3-3ENG MAINTENANCE Belt/Brush Access…………..……..……4-1 ENG Vac Motor Access &...
The MAINTENANCE section contains preventive Parts may be ordered from authorized Windsor maintenance to keep the machine and its dealers. When placing an order for parts, the components in good working condition. They are...
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. WARNING: To reduce the risk of fire, electric shock, or injury: Connect machine to a properly grounded outlet only. See grounding instructions. Do not leave appliance when plugged in.
In Flammable or Explosive areas. In areas with possible falling objects. WHEN SERVICING MACHINE: Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use Windsor approved replacement parts. WAVIF 86038520 05/15/07 2-2ENG...
GROUNDING INSTRUCTIONS THIS PRODUCT IS FOR COMMERCIAL USE ONLY. EXTENSION CORDS: The use of an extension cord with this appliance is not recommended. If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and must be limited to 50 feet (15.5m) in length.
CONTROLS Main Handle. Adjusts for operator comfort and storage. Brush on/off lever. Activates brush when depressed. Accessory vacuum hose and wand. Allows operator to clean edges, recessed, ledges, upholstery, etc. Detail tools Dusting brush, crevice and upholstery tools for above the floor cleaning. Dusting brush comes with adapter for attachment directly to hose.
OPERATIONS WAVE SET UP 1. Take machine out of storage position by lowering onto all four wheels. 2. Adjust handle to comfortable position at waist level by opening adjustment lever on left side of machine and moving handle. Lock back into position by closing adjustment lever.
OPERATION HOW IT OPERATES This machine is a portable, easy to use wide area vacuum designed for use indoors, in a commercial or light industrial environment. When operating as a carpet vacuum, soil is lifted from the carpet surface by a rotating brush and carried into a removable bag by the vacuum motors.
MAINTENANCE NOTE: T HE FOLLOWING SERVICE ITEMS SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE FACILITY OR AUTHORIZED SERVICE PERSONNEL LL PARTS REFERRED TO IN THESE INSTRUCTIONS CAN BE IDENTIFIED BY USING THE PARTS LISTS AND ILLUSTRATIONS ON THE FOLLOWING PAGES WARNING REMOVE MACHINE POWER CORD FROM ELEC- TRICAL SOURCE BEFORE MAKING ANY RE-...
MAINTENANCE DAILY MAINTENANCE 1. Shake out bag daily. 2. Check power cord for damaged or frayed insulation. 3. Return brush adjustment lever to “STORE” position when the machine is not in use. 4. Check for and remove any lint or debris around brush and brush housing.
BRUSH AND DRIVE GROUP BRUSH ASSEMBLY -DETAIL- Vacuum Door Assembly BRUSH ASSEMBLY BRUSH DRIVE MOTOR ASSEMBLY VACUUM DOOR ASSEMBLY 24 A,B BRUSH BRUSH DRIVE MOTOR ASSEMBLY WAVIF 86038520 04/08/08...
Page 15
WASHER, 1/4 LCK EXT STAR SS 86010740 87090 WASHER, 1/4ID X 3/4OD 86010840 880118 WIRE ASM, BRUSH MOTOR BRUSH SET, LEESON BRUSH 86001250 140212 MOTOR BRUSH SET, WINDSOR BRUSH 86135360 14340 86087030 73992 SHOE, VAC 86010640 87016 WASHER, #10 LOCK EXT STAR SS 86006800 70361...
BRUSH HEIGHT AND WHEEL GROUP MAIN FRAME ASSEMBLY 7 17 WAVIF 86038520 07/24/07...
Page 17
BRUSH HEIGHT AND WHEEL GROUP PARTS LIST SERIAL NO. PART NO. PRV NO. DESCRIPTION NOTES: FROM 86005860 57273 NUT, 1/4-20 X 12MM HEX BARREL 86008200 73996 SPACER, .50OD X .37ID X .44L SS 86006660 70190 SCR, 1/4-20 X 1/2 BHCS DL 86008750 80673 KNOB, WITH 1/2-13 F-INSERT...
VACUUM GROUP 7 (BRUSH SET) WAVIF 86038520 05/15/07...
Page 19
VACUUM GROUP PARTS LIST SERIAL NO. PART NO. PRV NO. DESCRIPTION NOTES: FROM 86276040 70586 SCR, 1/4-20 X 3/4 BLK PPHTC 86064180 36185 GUARD, BELT 86232160 27538 CAP, MOTOR END VAC-PAC 86068760 140196 BRKT, VAC MOTOR MOUNTING 86215090 140949 BAG, PAPER WIDE AREA VAC 86001200 140164 BAG, CLOTH U19855...
Page 21
HANDLE GROUP PARTS LIST SERIAL NO. PART NO. PRV NO. DESCRIPTION NOTES: FROM 86274640 70253 SCR, 10-32 X 1.25 PPHMS 86076510 38272 HANDLE, MAIN 86268300 88231 WIRE, 6" GRN/18 76008 X 76011 86091470 140309 BAR ASM, BRUSH SWITCH 86069190 140310 BRKT, SWITCH MOUNTING 86198480 27371...
ELECTRICAL PANEL AND COVER GROUP 1A,C,D NUTS SUPPLIED WITH CIRCUIT BREAKER WAVIF 86038520 05/15/07 5-11...
Page 25
ELECTRICAL PANEL & COVER GROUP PARTS LIST SERIAL NO. PART NO. PRV NO. DESCRIPTION NOTES: FROM 86234300 23672 CORD ASM, 75FT EURO OPEN 86260920 23202 CORD ASM, 75FT BRITISH 86260930 23203 CORD ASM, 75FT AUST 86256780 72076 SWITCH, DPST 250V 16 (6) A ROCKER 86003830 35206 GASKET, SWITCH SEAL...