Sign in today to find solutions:

Don't have an account? Sign up

Garland Salamander Broiler Operating And Maintenance Instructions Manual [Page 16]: Maintenance And Cleaning

Garland installation operation and service manual salamander broiler.

   

MAINTENANCE AND CLEANING

WARNING if gas odors are detected, the gas supply must
be turned "OFF" at the main shut-off valve and the local gas
company or authorized service agency contacted for service .
A program of proper cleaning techniques will aid in
continued trouble free operation of this or any quality
equipment .
Daily
The broiling rack should be wiped daily while still warm,
using a heavy cloth or other grease absorbing material to
remove grease and burnt food before they burn into the
grid . Remove burnt materials, such as carbonized grease
or food, with a stiff wire brush . DO NOT USE ANY TYPE OF
STEEL WOOL . Small particles may be left on the rack surface
and get into food products . The rack should be washed
thoroughly using a wire brush and a hot, mild detergent or
soap solution . Rinse with clear, warm water .
Monthly
Lubricate valves and bearings as required . Due to the
usual location of the broiler that is mounted above a range
with open tops, the heat from the open top will cause the
Page 16
lubrication grease inside the valves to dry out . When you
notice that the valve is becoming harder to turn it is then
time to have them greased . We suggest an Authorized
Service Agent who is familiar with the appliance and working
with natural and propane gas, to perform this type of work .
Exterior Cleaning
Establish a regular schedule . Any spills should be wiped off
immediately .
1 . Wipe exposed, clean-able surface when cool with a mild
detergent and hot water . Stubborn residue spots may be
removed with a light weight non-metallic scouring pad .
Dry thoroughly with a clean cloth .
2 . Stainless steel should be cleaned using a mild detergent,
a soft cloth and hot water . If it is necessary to use a non-
metallic scouring pad, always rub in the direction of the
grain in the metal to prevent scratching . Use a water
based stainless steel cleaner (such as Drackett Twinkle), if
you want a high shine .
Part # 4523974 (11/07)
Next page -> <- Previous page

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: