Troubleshooting - Westinghouse UW46T7HW User Manual

Table of Contents

Advertisement

TROUBLESHOOTING

Problem
No power
Power is suddenly turned
off.
Remote control does not
work.
Remote control code
cannot be detected by a
universal remote.
No picture
No picture or the No Signal
message appears when a
VGA cable is connected.
Corrective Action
Make sure the power indicator is illuminated
blue.
Make sure the power cord is securely connected
to the AC-in jack and is plugged into a functional
AC outlet. You may want to plug in another
electrical device to the power outlet to verify that
it is supplying the proper voltage.
Make sure the sleep timer is turned off.
Press only one button at a time.
Make sure the batteries are properly inserted.
The batteries may already be drained out.
Replace batteries with new ones.
Purchase a separate learning remote control.
Go to www.wde.com for a list of remote codes.
Make sure the video input cable is properly
connected to the correct terminal, and that the
correct input mode is enabled. To illustrate, when
a VGA cable is connected to display a computer
screen, the VGA input mode must be enabled.
Verify that the antenna is properly connected
and that the preferred channel is enabled in the
channel list. Press and select Channels/Channel
List.
Adjust the display settings.
Make sure the VGA cable is properly connected
to the LED TV's VGA port.
Decrease the video resolution setting on the
computer and try again.
Adjust the display settings.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uw39t7hwUw48t7hw

Table of Contents