Central Pneumatic CentralPneumatic 17 GAL Owner's Manual & Safety Instructions

Central Pneumatic CentralPneumatic 17 GAL Owner's Manual & Safety Instructions

17/26 gal oilless air compressor

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic CentralPneumatic 17 GAL

  • Page 2: Table Of Contents

    Table of Contents Safety ............2 Maintenance ..........11 Setup ............6 Parts List and Diagram ......14 Specifications ..........6 Warranty ............ 16 Operation ........... 10 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3: Safety

    IMPORTANT SAFETY INFORMATION General Safety Warnings WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
  • Page 4: Air Compressor Safety Warnings

    10. Do not use the air hose to move the compressor. information. If unreadable or missing, contact 11. Release the pressure in the Harbor Freight Tools for a replacement. storage tank before moving. 17. This product is not a toy.
  • Page 5 Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the compressor. Never remove the grounding prong from the plug.
  • Page 6 Specifications Model 69669 69666 Electrical Rating 120V~ / 60Hz / 13.5A Air Outlet Size ″ -18 NPT Shut-off 150 PSI Air Pressure Restart 125 PSI Air Tank Capacity 26 Gallons 17 Gallons 226892 4 SCFM @ 90 PSI Air Flow Capacity 5 SCFM @ 40 PSI Sound Level 91 dB @ 3′...
  • Page 7: Setup

    Setup 1. Break in the new Air Compressor as follows: 2. Connect a regulator valve, an inline shut off valve and a 1/4″ NPT air hose to the Quick Coupler a. Turn the Power Switch off and unplug the unit. (all sold separately).
  • Page 8 Page 8 For technical questions, please call 1-800-444-3353. Item 69666 69669...
  • Page 9 Item 69666 For technical questions, please call 1-800-444-3353. Page 9 69669...
  • Page 10: Compressor Area Set Up

    Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Compressor Area Set Up 1. Designate a work area that is clean and well-lit. 3.
  • Page 11: Operation

    Automatic Shut off System 1. If the Compressor automatically shuts off 2. Possible causes of repeated automatic before reaching its normal cutoff pressure: shut off of the compressor are: a. Shut off all tools. a. Using an extension cord that is too long or narrow; b.
  • Page 12: Maintenance

    Draining Moisture from the Tank The Drain Valve is located under the Tank. It must be used daily to release all trapped air and moisture from the Tank. This will eliminate condensation which can cause tank corrosion. CAUTION! Do not open the Drain Valve so that more than four threads are showing. 1.
  • Page 13: Please Read The Following Carefully

    Troubleshooting (cont.) Problem Possible Causes Likely Solutions Overheating 1. Air filters need cleaning/replacing. 1. Check inlet and outlet filters. Clean and/or replace as needed. 2. Unusually dusty environment. 2. Clean and/or replace filters more often or move unit to cleaner environment. 3.
  • Page 14: Parts List And Diagram

    Parts List and Diagram Parts List Part Description Part Description Bolt M6x35 Washer Ø4 Spring Washer M6 Bolt M5x6 Cylinder Head Ground Symbol Exhaust Elbow Overload Protector Valve Plate Strain Relief Inlet Valve Reed Grommet Outlet Valve Reed Bolt M8x25 Limiter Washer M8 Inlet Valve Reed Cover...
  • Page 15: Assembly Diagram

    Assembly Diagram 51 49 57 58 Item 69666 For technical questions, please call 1-800-444-3353. Page 15 69669...
  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

26 gal oilless air compressor6966669669

Table of Contents