GE GFWR4805 Owner's Manual page 3

Table of Contents

Advertisement

Available languages

Available languages

GEAppliances.com
PROPERINSTALLATION
_b
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting GEAppliences.com or by calling
800.GE.CARES(800./452.2757).
[] Ensurethat the hot water hose is connected to the "H"
Parts and Accessories
(internal red screened) valve and the cold water hose is
connected to the "C" (internal blue screened) valve.
[]
[]
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate the
warranty.
Properly ground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
[] This washer does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts. A list of factory hoses available for purchase are
listed below. These hoses are manufactured and tested to
meet GEspecifications.
Order on-line at GEApplianceparts.com today, 24 hours a
day or by phone at 800.626.2002 during normal business
hours.
Port Number
PM!4X!O002
Or
PM!4X!O005
WXlOXlO011
WX7X!
Accessory
4 ft RubberWater Supply Hoses
4 ft Braided Metal Water Supply Hoses
Tide®Washing Machine Cleaner*
Washer FloorTray
GEstrongly recommends the use of new water supply
hoses. Hosesdegrade over time and need to be replaced
every 5 years to reduce the risk of hose failures and water
damage.
WHEN NOT IN USE
[] Turn off water faucets to minimize leakage if a break or
rupture should occur. Check the condition of the fill hoses;
GErecommends changing the hoses every 5 years.
SAVE THESE INSTRUCTIONS
* Tide® is a registered trademark of Procter & Gamble

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents