Magnavox MWR10D6 Owner's Manual

Funai dvd recorder user manual

Hide thumbs Also See for MWR10D6:

Quick manual (82 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Magnavox MWR10D6

Page 1 Antenna Antenna Cable Cable TV signal TV signal DVD Recorder MWR10D6 RF cable (supplied) RF cable (supplied) Connect Connect Logo I Both A/V and RF cables must be connected to the TV for operation. I See front page of the Owner's Manual for the connection with the RF modulator.
Page 2: Dvd Recording
When the unit reaches the specified time, the unit will be turned off automatically. Open the disc tray. Editing titles Playable DVD player Not Playable Not finalized Not performing Make Edits Compatible after editing titles Timer Recording Timer Programming list appears.
Page 3 Set channel 3 or 4. (supplied) AC 120V ANT IN CHANNEL TO TV AUDIO IN VIDEO IN RF cable (commercially available) MWR10D6 Audio/Video cables (supplied) Turn on your TV and select channel 3 or 4. (Back of TV) Note • The quality of Antenna in jack...
Page 4: Before You Start
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
Page 5: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Page 6 Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug. • If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Notice for progressive scan output Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard...
Page 7 Maintenance SERVICING • Please refer to relevant topics on “Troubleshooting” on pages 71-74 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. CLEANING DISCS • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. CLEANING THE DISC LENS • If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. IR SIGNAL CHECK If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.
Page 8: Table Of Contents
Before you start ....2 Precautions ....... 2 Table of contents .
Page 9: Features
This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. Recording This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD- R, which is available for recording once. You can choose either one for your convenience. Even if you choose DVD-RW/DVD-R discs, these discs are for- matted with DVD+VR mode. Up to 8 program recording: You can program the unit to record up to 8 pro- grams, with in a month in advance. Daily or weekly program recordings are also available. One-touch Timer Recording: You can easily set a recording time as you prefer. Every time [RECORD I ] or [REC I ] is pressed dur- ing recording, the recording time will be increased by 30 minutes up to 8 hours. The recording automatical- ly stops when the recording time you set is reached. Automatic Chapter mark setting: Chapter marks will be put on recordings as you set in the Setup menu before attempting to record. Automatic Title list making: The unit makes title list with the index automatically.
Page 10: Functional Overview
Front Panel * The unit can also be turned on by pressing this button. Disc tray Place a disc when opening the disc tray. OPEN/CLOSE A button* Press to open or close the disc tray. PLAY B button Press to start or resume play. RECORD I button Press once to start a recording. Press repeatedly to start a One-touch Timer Recording. PREV H button During playback, press to return to the beginning of the current chapter or track. During playback, press and hold for 1.5 seconds to fast reverse. Or when playback is paused, press to play reverse step by step. When playback is paused, press and hold for 1.5 seconds to play slow reverse. STOP C button Press to stop playback or recording. Front Panel Indicator Guide POWER indicator Light on when power is on.
Page 11 Functional overview (cont’d) Rear Panel COMPONENT VIDEO IN VIDEO OUTPUT S-VIDEO ANTENNA AUDIO IN (E1) 1. ANTENNA IN jack Use to connect an antenna. 2. VIDEO IN jack (EXT1) Use to connect external equipment with a stand- ard video cable. 3. VIDEO OUT jack Use to connect a TV monitor, AV receiver or other equipment with a standard video cable. 4. AC Power Cord Connect to a standard AC outlet to supply power to this unit. 5. COAXIAL DIGITAL AUDIO OUTPUT jack Use to connect an AV receiver, Dolby Digital decoder or other equipment with a coaxial digital input jack with a digital coaxial cable.
Page 12: Remote Control
Functional overview (cont’d) Remote Control ( * ) The unit can also be turned on by press- ing this button. 1. STANDBY-ON button Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode. 2. Number/Character buttons Press to select channel numbers. Press to select a title/chapter/ track on display. Press to enter values for the settings in the Setup menu. Or press to enter title names. 3. CLEAR button Press to clear the password once entered or to cancel the programming for CD or to clear the selecting marker number in the Edit menu or to clear the program once entered in the Timer Programming list, etc. 4. PREV H button During playback, press to return to the beginning of the current chapter or track. Or when play-...
Page 13: Installing Batteries In The Remote Control
Functional overview (cont’d) Installing batteries in the remote control Install two “AAA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of batteries together, although they may look similar, different batteries may have different voltages. • Make sure that the plus and minus ends of each battery match the indications in the battery compartment. • Remove batteries from equipment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. Guide to Displays on screen menu This unit uses the following on screen menu for most operations: Setup menu and Title list, and Display menu.
Page 14: Setup Menus
Functional overview (cont’d) Setup menus Press [SETUP] to display the Setup menu. Then using the menu. These menus provide entries to all main functions of the unit. Setup Required Settings Playback Display Recording Clock Channel Disc Edit 1. Required Settings: To set up the required settings. 2. Playback: To set up the unit to play discs as you prefer. 3. Display: To set up the OSD screen and the front display of the unit as you prefer. 4. Recording: To set up the unit to record to discs as you prefer. 5. Clock: To set up the clock of the unit as you need. 6. Channel: To adjust the channel setting of the unit as you prefer.
Page 15: Connections
Antenna Cable Cable TV signal TV signal (Back of TV) Disconnect Make one of the following connections, depending on the capabilities of your existing equipment. Basic Audio Audio cable (supplied) This unit VIDEO OUT COMPONENT VIDEO IN VIDEO OUTPUT VIDEO OUT S-VIDEO ANTENNA COAXIAL AUDIO IN AUDIO OUT (E1) AUDIO OUT AUDIO OUT After you have completed connections • Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check your TV owner’s manual for details.
Page 16: Connection To A Cable Box Or Satellite Box
Connection to a cable box or satellite box (Cable box or Cable Satellite box) TV signal RF cable (Commercially Connect available) With this setup: • You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure that the cable box or satellite box is turned on. • You cannot record one channel while watching another channel. Note to the Cable TV System Installer : This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the...
Page 17: Connection To An Audio System
Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Stereo system AUDIO Audio cable (supplied) This unit Note • Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. Connections Dolby Digital decoder, MD deck or DAT deck Analog audio input jacks Audio Coaxial Digital cable (commercially available) VIDEO OUT DIGITAL AUDIO OUT...
Page 18: Getting Started
The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit with the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs. For example, when you want to record repeatedly on the same disc, select the rewritable DVD+RW/DVD-RW type disc. When you want to save recordings without any alteration, a non-rewritable DVD+R/DVD-R can be your choice.
Page 19 Easy DVD recording (cont’d) Step 5: Select the desired channel. CH 12 Hint 1: Play the recorded contents You can select the title you want to play from a displayed title list, and immediately start to play. Recorded contents are easily accessible, with simple procedure of choosing a title on in the menu screen. What are titles and chapters? The contents of the DVD disc are generally divided into titles. Titles may be further divided into chapters. Hint 2: Edit the recorded disc You will find editing discs is easy. This unit offers convenient edit functions to discs formatted with DVD+VR mode. You can edit the following from a title list or setup menu. •...
Page 20: Initial Setting
Turn on this unit for the first time, you need to follow these steps. Press [STANDBY-ON Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 13. TV's original remote control TV / VIDEO *This button can be labeled as INPUT , AUX , etc. “Initial Setup” will automatically appear. Initial Setup English Français Español...
Page 21: Adding/Deleting Channels
To select a channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press [1], [1], [7]) • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). • You can select the line input mode (“E1” or “E2”). To select “E1” by pressing [0], [0], [1]. To select “E2” by pressing [0], [0], [2]. Details are on page 35. Note • If the auto channel presetting is cancelled during presetting, some channels not yet preset may not be received. • The selection will depend on how you receive the TV channels. To cancel the auto channel presetting during scanning: Press [RETURN] or [SETUP] to cancel. Adding/deleting channels The channels you no longer receive or seldom watch can...
Page 22: Selecting The Tv Stereo Or Sap
Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear. Notes on TV channel audio • When you record a TV program available in second audio or stereo, you have to select either Stereo or SAP in the Channel Preset screen beforehand. Refer to the following table to check an appropriate setting. Selected Broadcast audio audio Stereo STEREO+SAP STEREO STEREO STEREO MONO+SAP MONO STEREO+SAP SAP STEREO MONO+SAP MONO...
Page 23: Setting The Clock
Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 22. Auto Clock Setting Make sure • The antenna/Cable TV connections are correct. • If this unit is connected to a Cable Box or Satellite Box, select the local PBS station on them to set the clock automatically. Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Clock menu will appear. Using [K / L], select “Auto Clock Setting”. Press [OK]. Option window will appear.
Page 24: Manual Clock Setting
Manual Clock Setting Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Using [K / L], select “Clock Setting”. Press [OK]. Clock Setting menu will appear. Clock Setting ---- / -- / ---- ( ---- ) -- : -- -- Press [OK] again. Default date will appear.
Page 25: Setting The Daylight Saving Time
Setting the Daylight Saving Time When “Daylight Saving Time” is ON, the unit clock will automati- cally move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. “On” has been selected as the default. Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Clock menu will appear. Selecting the TV aspect ratio You can select the TV aspect ratio to match the formats of what you are playing with the unit and your TV screen (4:3 standard or 16:9 widescreen TV). “4:3 Letter Box” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Settings”.
Page 26: Recording
Information on DVD recording Information This unit can record to DVD+RW, DVD-RW, DVD+R and DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. These discs are formatted with DVD+VR mode automatically. Discs other than DVD+VR mode cannot be recorded in this unit. Logo Attributes 8cm/12cm, single-sided, single layer disc DVD+RW Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm) DVD+R 8cm/12cm, single-sided, single layer disc Approx.
Page 27: Making Discs Playable In Other Dvd Player (Finalize/Make Edits Compatible)
Information on DVD recording (cont’d) Making discs playable in other DVD player (Finalize/Make Edits Compatible) After recording on DVD+R/DVD-R/DVD-RW, you must finalize the disc in order to play on other units. (Refer to page 36.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on other units after editing. DVD+RW DVD-R/DVD-RW DVD+R This Unit • Once DVD+R/DVD-R/DVD-RW discs are finalized, you cannot record additionally or edit. • You cannot record additionally or edit on finalized DVD-RW discs unless the DVD-RW discs are performed “Undo Finalize”. Recording Editing titles DVD player Not finalized Not performing Make Edits Compatible after editing titles...
Page 28: Before Recording
Replacing disc menu DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW It can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units. “OFF” has been selected as the default. Press [SETUP]. Using [K / L], select “Recording”. Press [OK]. Recording menu will appear. Using [K / L], select “Replace Disc Menu”. Press [OK]. Setting for Auto Chapter DVD+RW DVD+RW DVD+R...
Page 29: Basic Recording
DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW Follow the steps below to record TV programs. Press [STANDBY-ON Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A]. The disc tray will open. Insert your disc with its label facing up. Align the disc to the disc tray guide. disc tray guide Press [OPEN/CLOSE A] to close the disc tray.
Page 30: One-Touch Timer Recording
DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby mode. Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit. This operation may take a while to be recognized. Using [REC MODE], select a recording mode. Refer to “Recording mode” on page 24.
Page 31: Timer Recording
DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before setting a timer programming. • Insert a recordable disc. Press [TIMER PROG.]. Timer Programming list will appear. Timer Programming Date Start Mode Using [K / L], select a program number. Press [OK]. Using [K / L], enter the Date. Press [B].
Page 32 Checking, canceling, or correcting the timer programming information Press [STANDBY-ON TIMER REC indicator will be off. Press [TIMER PROG.]. Timer Programming list will appear. Timer Programming Date Start Mode 1. JAN/01 12:57AM 1:57AM CH 8 Check the information on the list you will need. To stop the Timer Recording in process Press [STOP C] on the front panel of the unit.
Page 33: Hints For Timer Recording
Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not on the tray, TIMER REC indicator flashes and Timer Recording cannot be performed. In some cases, TIMER REC indicator will be on momentarily around the start point as the unit attempts to record. Please insert a recordable disc. • When all the Timer Recording is completed, TIMER REC indicator flashes. To play or eject the recorded disc, ] first, then select the recorded title and press [PLAY B] or [OPEN/CLOSE A]. press [STANDBY-ON • During Timer Recording or timer standby mode (TIMER REC indicator will be on), any operations on the unit will not be available. To make these operations available, cancel the Timer Recording or timer standby mode first (TIMER REC indicator will be off). • To cancel the timer standby mode, press [STANDBY-ON • When the Start and the End time are the same, the length of the recording will be set for 24 hours. When the disc reaches at the end during the recording, the unit turns itself off. • When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing. • If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off. The priority of overlapped settings This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority.
Page 34: Overwriting An Existing Title
Overwriting from the beginning of the title DVD+RW DVD+RW DVD-RW DVD-RW You can overwrite the existing title from the beginning. Turn on the unit. Make sure that the TV input is set on the unit. Load the disc that includes a title to be overwritten. Title list will appear. If the title list does not appear, press [DISC MENU]. SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 NOV/22/06 11:35AM CH13 EP NOV/22/06...
Page 35: Hints For Overwriting
Overwriting an existing title (cont’d) Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Title name: A Existing Title (B)
Page 36: Settings For An External Source
Settings for an external source Connection to an external source DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. OUTPUT S- VIDEO VIDEO AUDIO S-Video Video Audio cable cable cable To EXT 2 IN 1. Press [SETUP]. 2. Using [K / L], select “Required Settings”. Press [OK]. 3.
Page 37: Recording From An External Source
Settings for an external source (cont’d) Recording from an external source DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW Before recording from an external source, see the instructions for the connection on page 34. 1. Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected. Refer to the table on page 13.
Page 38: Playing The Discs In Other Dvd Players
Playing the discs in other DVD players Finalizing a disc DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You will need to finalize discs to play in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Details are on page 25. Press [SETUP]. Using [K / L], select “Disc Edit”. Press [OK]. Disc menu will appear. Using [K / L], select “Finalize”. Press [OK].
Page 39: Auto Finalizing
Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space. Press [SETUP]. Using [K / L], select “Recording”. Press [OK]. Recording menu will appear. Using [K / L], select “Auto Finalize”. Press [OK]. Auto Finalize menu will appear.
Page 40: Playing Discs
Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit.
Page 41: Basic Playback
Playback DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW Press [STANDBY-ON Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] . The disc tray will open. Insert your disc with its label fac- ing up.
Page 42: Playing Mp3 Disc
Video Video DVD-V DVD-V DVD-V DVD-V DVD-R DVD-R DVD-RW DVD-RW Press [STANDBY-ON Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. Insert your disc with its label fac- ing up.
Page 43: Playing Discs Using The Disc Menu
Playing discs using the disc menu DVD-V DVD-V DVD-V DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection.
Page 44: Special Playback
Resume play DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R You can resume play from where you stopped playing the disc last. During playback, press [STOP C]. The resume message will appear. Resume ON Press [PLAY B].
Page 45: Rapid Play
Rapid play DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback.
Page 46: Zoom
Zoom DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Video CD Video CD During playback, press [DISPLAY]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select . Press [OK]. Zoom menu will appear. 0:00:00 DVD-Video There are four options...
Page 47: Search
Title/Chapter search DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Using [PREV H] / [NEXT G] During playback, press [NEXT G] to skip the current title or chap- ter and move to the next. The title or chapter will move forward by one at a time.
Page 48: Track Search
Track search Video CD Video CD Using [PREV H] / [NEXT G] During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H]. Press it repeatedly to go to the previous track.
Page 49: Repeat/Random/Program Playback
Repeat/Random/Program playback Repeat playback DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R During playback, press [DISPLAY]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select . Press [OK]. Repeat menu will appear. <DVD-Video>...
Page 50: Program Playback
Repeat/Random/Program playback (cont’d) Program playback Video CD Video CD You can program the disc to play in your desired order. Press [SETUP]. Using [K / L], select “CD Playback Mode”. Press [OK]. CD Playback Mode menu will appear. Using [K / L], select “Program Play”.
Page 51: Switching Audio Soundtrack
Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V DVD-V DVD-V DVD-V Video CD Video CD When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during playback. When playing Video CDs or Audio CDs, you can switch between stereo, just the left channel or just...
Page 52: Switching Camera Angles
Selecting the format of audio and video (cont’d) Switching camera angles DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes.
Page 53: Editing
Information on disc editing Guide to a title list Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. Press [TITLE].
Page 54: Editing Discs
Deleting titles DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to record on will be increased.
Page 55: Putting Names On Titles
Putting names on titles DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list. Follow steps 1 to 3 on page 52 to display the Edit menu.
Page 56: Setting Chapter Marks
Setting chapter marks DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. Follow steps 1 to 3 on page 52 to display the Edit menu.
Page 57 Clearing chapter marks (cont’d) Press [RETURN] to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed. To delete all chapter marks: Follow steps 1 to 3 on page 52 to display the Edit menu. Using [K / L], select “Chapter Mark”.
Page 58: Hiding Chapters
Hiding chapters DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW You can hide chapters from the title list. Hidden chapters are skipped during playback. Follow steps 1 to 3 on page 52 to display the Edit menu. Using [K / L]] , select “Current Chapter”.
Page 59: Setting Pictures For Thumbnails
Setting pictures for thumbnails DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.
Page 60: Dividing A Title
Dividing a title DVD+RW DVD+RW DVD-RW DVD-RW You can divide one title into two new titles. Follow steps 1 to 3 on page 52 to display the Edit menu. Using [K / L], select “Title Dividing”. Press [PLAY B] and then [PAUSE F] to decide the point at which you will divide the title.
Page 61: Editing Discs (Setup Menu)
Editing discs (Setup menu) Putting name on disc DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW You can put title names on the titles and change the names from this menu. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Disc Edit”.
Page 62: Setting Or Releasing Disc Protect
Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW To prevent accidental editing, or erasing the titles, you can protect them. Follow steps 1 to 2 on page 59 to display the Disc Edit menu. <DVD+RW>...
Page 63 Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont’d) Releasing disc from protect Follow steps 1 to 2 on page 59 to display the Disc Edit menu. <DVD+RW> Disc Edit Edit Disc Name Disc Protect ON Erase Disc Make Edits Compatible <DVD+R/DVD-R>...
Page 64: Erasing Disc
Editing discs (Setup menu) (cont’d) Erasing disc Video DVD+RW DVD+RW DVD-RW DVD-RW DVD-RW DVD-RW You can erase all titles on a disc. If you want to record on DVD-RW formatted with other than DVD+VR mode, erase all contents on the disc and format it.
Page 65: Changing The Setup Menu
Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) 1.Language setting Disc Menu Language Pages 64-65 Audio Language Subtitle Language 2.Display setting OSD Language...
Page 66: Language Setting
Changing the Setup menu Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. Using [K / L], select “Language”. Press [OK]. Language menu will appear. Using [K / L], desired item. Press [OK]. Disc Menu Language (Default : English) Set the language for Disc Menu.
Page 67: Display Setting
Changing the Setup menu If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle Code Input Press [SETUP] to exit. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Display”. Press [OK]. Display menu will appear.
Page 68: Audio Setting
Changing the Setup menu Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. Display OSD Language English Angle Icon Screen Saver 10 minutes Press [SETUP] to exit. Choose the appropriate Audio settings for your external equipment.
Page 69 Changing the Setup menu Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [OK]. Digital Out - PCM Your setting will be activated. 48kHz 48kHz 96kHz 96kHz Settings for Dolby Digital (Default : Stream) •...
Page 70: Video Setting
Changing the Setup menu Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. Press [SETUP].
Page 71: Settings For Parental Lock Level
Changing the Setup menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
Page 72: Settings For Pbc (Playback Control)
Changing the Setup menu Settings for Parental lock level (cont’d) A password has been set already. Parental Lock Password Input * * * * • Using the Number buttons, enter the current password. Press [SETUP] to exit. Note • Press [CLEAR] to erase numbers entered incorrectly. •...
Page 73: Others
• Keep the equipment which may cause electrical disturbances, such as a cellular phone, away. • If the playback picture output from a DVD player, VCR or tuner goes through the unit before reaching your TV, the copy-protection signal applied to some programs could affect picture quality.
Page 74 Symptom Playback The disc does not play. Playback image freezes for a second. The disc does not start playback from the beginning. The unit starts playing from the disc automatically. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. The language for the sound track cannot be changed.
Page 75 Troubleshooting (cont’d) Symptom Others The unit does not operate properly. The disc tray does not open when you press [OPEN/CLOSE A]. “Repairing” appears on the TV screen. Repairing In a case you intend to cancel the Repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable.
Page 76: Language Code
Error message Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Recording Error You cannot record on this disc as Control Information is full. Recording Error You cannot record on this disc as Power Calibration Area is full.
Page 77: Glossary
Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height.
Page 78: Specifications
General System Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format Recording Recording format Recordable discs Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format Tuner Receivable channels CATV Input/Output VHF/UHF antenna input/output terminal...
Page 79: Español
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables. Este grabador de DVD puede grabar los siguientes tipos de discos.
Page 80 Fácil grabación de DVD (cont.) Paso 5: Eleccione el canal des eado. CH 12 Sugerencia 1: Reproduzca el contenido grabado Puede seleccionar el título que desea reproducir de un menú indicado y empiece a reproducir inmediatamente. El contenido grabado se puede acceder fácilmente con un simple procedimiento de elegir un título en la pantalla del menú.
Page 81 MEMO...
Page 82: Limited Warranty
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Magnavox MWR10D6 Owner's Manual

Before You Start

Precautions

Table of Contents

Features

Functional Overview

Connections

Connection to a TV

Connection to a Cable Box or Satellite Box

Connection to an Audio System

Getting Started

Easy DVD Recording

Initial Setting

Channel Setting

Selecting the TV Stereo or SAP

Setting the Clock

Selecting the TV Aspect Ratio

Recording

Information on DVD Recording

Before Recording

Basic Recording

One-Touch Timer Recording

Timer Recording

Overwriting an Existing Title

Settings for an External Source

Setting a Disc to Protect

Playing the Discs in Other DVD Players

Playing Discs

Information on DVD Play

Basic Playback

Special Playback

Search

Repeat/Random/Program Playback

Selecting the Format of Audio and Video

Editing

Information on Disc Editing

Editing Discs

Editing Discs (Setup Menu)

Changing the Setup Menu

Tour of the Setup Menu

Language Setting

Display Setting

Audio Setting

Video Setting

Settings for Parental Lock Level

Settings for PBC (Playback Control)

Others

Troubleshooting

Language Code

Glossary

Frequently Asked Questions

Specifications

Español

Limited Warranty

Quick Links

Related Manuals for Magnavox MWR10D6

Summary of Contents for Magnavox MWR10D6

Table of Contents