Search Functions; Using Track Search; Using Title / Chapter Search; Using Time Search - Magnavox DP170MW8B Owner's Manual

Search Functions

Search function does not work during programmed or random playback.

Using Track Search

1 Press [SEARCH].
SEARCH
2 Select track number by using [the Number buttons] within 30
seconds.
1 2 3
5
4 6
7 8 9
0 +10
• For the disc with less than 10 tracks, press the track number directly.
• For discs with more than 10 but less than 99 tracks, to play back
single-digit track, press [0] first, then the track number (e.g., for track 3,
press [0], [3]). To play back a double-digit track, press the track number.
• For discs with more than 100 tracks, to play back a single or a
double-digit track, press [0] first, then the track number (e.g., for track 3,
press [0], [0], [3], and for track 26, press [0], [2], [6]). To play back a
triple-digit track, press the track number.
Using [PREV ], [NEXT
H
1 Press [PREV H], [NEXT G] during playback.
PLAY
PREV
Note:
• [+10] can also bring the track search display, except for the disc
with less than 10 tracks. For such a disc, track search can be done
by just pressing track number.
• For audio CD, JPEG track search is not available for programmed
and random playback.

Using Title / Chapter Search

Press [SEARCH] once for the chapter search.
1
Press [SEARCH] twice for the title search.
PLAY
SEARCH
2 Select title/chapter number by using [the Number
buttons] within 30 seconds.
1 2 3
4 5 6
7 8 9
0 +10
Using [PREV ], [NEXT
H
1 Press [PREV H], [NEXT G] during playback.
PLAY
PREV
Note:
• Depending on the disc being played back, this function can
also be performed by directly entering the desired chapter
number with [the Number buttons]. Refer to the manual
accompanying the disc.
/29
/29
]
G
Current Track
(TR)
NEXT
TR 1 TR 2 TR 3 TR 4
PREV NEXT
/12
/12
]
G
Current Chapter
(CH)
CH 1 CH 2 CH 3 CH 4
NEXT
PREV NEXT
or
Current Title
(TT)
TT 1 TT2 TT3 TT4
PREV NEXT
(If the disc has no chapters)

Using Time Search

1 Press [SEARCH] repeatedly until the time search display
appears.
PLAY
2 Select a desired disc time by using [the Number buttons]
within 30 seconds.
Note:
• When there is no need to enter a number, "0" appears automatically.
For example, "0: 0_: _ _" appears in the time search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
• For audio CD, time search is not available for programmed and
random playback.

Marker Setting

This function allows you to assign a specific point on a disc to be
called back later.
To set a marker
1 Press [SEARCH] repeatedly until the marker display
appears.
PLAY
2 Select a marker.
or
3 Press [OK].
OK
To return to the marker later
1 Press [SEARCH] repeatedly until the marker display
appears.
SEARCH
2 Select the marker.
or
3 Press [OK] at the desired marker.
OK
To exit the marker screen
1 Press [RETURN].
Note:
• The marker display will disappear in about 30 seconds when
there is no output.
• To clear a marker, select the marker to be cleared at step 2 in
the section "To set a marker" or "To return to the marker later"
and then press [CLEAR].
• Opening the disc tray or turning off the power will erase all
markers.
• Selecting "AC" at step 2 in the section "To set a marker" or
"To return to the marker later" will also erase all markers.
– 15 –
TOTAL
SEARCH
1 2 3
4 5 6
TOTAL
7 8 9
0 +10
SEARCH
RETURN
1:29:00
1:29:00
EN