Switching Each Mode; Screen Information - Durabrand CR130DR8 Owner's Manual

Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV
(NTSC) or to access an external device when they are connected to the unit.
Press [DTV/TV] repeatedly to change the analog TV or
the digital TV.
/
DTV TV
Note:
• When you switch the analog mode to the digital mode,
it may take a while until the digital channel selection is
completed. The following TV screen is displayed while
switching the mode.
Press [INPUT SELECT] repeatedly to cycle through the
input modes.
INPUT
SELECT
• To use the video input jack on the front of the unit,
select "VIDEO".

Screen Information

You can display the currently selected channel or other information such as
the audio mode on the TV screen.
TV
In the analog mode, the current channel number is displayed.
Press [INFO].
INFO INFO
• The current channel number is displayed at the top-
right corner of the TV screen.
• To clear the display, press [INFO] again.
ANALOG MODE
DIGITAL MODE
NOW SCANNING
ANALOG MODE
DIGITAL MODE
VIDEO
CH 25
DTV
In the digital mode, the detailed broadcasting information for the current
channel such as program title, the program guides are displayed.
Press [INFO] repeatedly to cycle through the available
display modes.
INFO INFO
[Broadcasting Information]
• The following information is displayed.
1 channel number
2 broadcast station
3 program title
4 audio language
Press [AUDIO] repeatedly to cycle through the
available audio languages.
("OTHER" is displayed when the audio language
cannot be acquired, or the acquired languages are
other than English, Spanish or French.)
2
KABC
A Day of Memories
3
ENGLISH 1/3
4
[Program Guide]
• The program guide added to broadcasting
information is displayed.
KABC
A Day of Memories
ENGLISH 1/3
A quarter-century ago, which may now
qualify as the good old days of newsp-
program
apering, run-of-paper sales accounted
guide
for 80 percent of the industry's adverti-
sing revenues.
Next - Push Vol Y Key Back - Push Vol X Key
Note:
• When the program guide consists of more than 6 lines, use
[VOL X/Y] to scroll.
• "No description provided" is displayed when the program
guide is not provided.
• While the program guide is displayed, the closed caption
function is interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO input
jack.
• Available languages differ depending on the broadcast.
• The information display will automatically disappear in a
few seconds when the closed caption is on.
• Pressing [AUDIO] does not control external audio source.
OFF
BROADCASTING INFORMATION
PROGRAM GUIDE
1
CH 95-03
CH 95-03
VIDEO
EN
13