Download Print this page
Fujitsu Stylistic LT Series User Manual
Fujitsu Stylistic LT Series User Manual

Fujitsu Stylistic LT Series User Manual

Mini-dock stylistic lt series

Advertisement

Quick Links

FMW43PR1
Mini-Dock
User's Guide
Stylistic LT Series
This mini-dock is designed to extend the connectivity of
your pen tablet by providing a number of ports that are
not available on the system. Refer to Figures 1, 2, and 3 for
port locations. The mini-dock can also be used as a
charging dock for periods when the pen tablet is not being
used.
This mini-dock provides the following interfaces:
• PS/2-style Mouse Port
Used for connecting a mouse with a PS/2-style
connector.
• AC Adapter Port
Used for connecting the AC adapter to supply
power to the system.
• Parallel Port
Ordinarily used for connecting a printer.
• Serial Port
Used for connecting a serial device.
Floppy
Disk Drive
FMWFD2
USB
Device
8/00
Mini-Dock
PS/2-Style
Keyboard
Figure 1. Mini-Dock peripheral Interfaces
Fujitsu is a registered trademark of Fujitsu Ltd. © 2000 Fujitsu PC Corporation
• Video Port
Used for connecting a video monitor for displaying
the contents of the pen tablet screen.
• Floppy Disk Drive Port
Used for connecting the optional floppy disk drive
(FMWFD2).
• PS/2-style Keyboard Port
Used for connecting a keyboard with a PS/2-style
connector.
• LAN Port
Used for connecting the pen tablet's optional
internal LAN module to a LAN hub.
Note: The mini-dock is required in order to use the
internal LAN module; there is no LAN port on the
pen tablet.
• USB Port
Used for connecting Universal Serial Bus-compliant
devices.
PS/2-Style
Mouse
Page 1 of 2
Pen Tablet
PC Card
Video
Monitor
Printer
58-0737-00B

Advertisement

loading

Summary of Contents for Fujitsu Stylistic LT Series

  • Page 1 FMW43PR1 Mini-Dock User’s Guide Stylistic LT Series This mini-dock is designed to extend the connectivity of your pen tablet by providing a number of ports that are not available on the system. Refer to Figures 1, 2, and 3 for port locations.
  • Page 2 The viewing angle of the mini-dock can be adjusted to four different positions. The bottom of the support bail on the rear of the support platform (see Figure 3). snaps into one of four slots. When storing the mini-dock, flip the bail up against the back of the support platform to allow the platform to lie flat.