Ricoh Aficio SP 204SN Software Installation Manual page 11

4. From the CD-ROM menu, click [Network Quick Install (Fixed IP)].
5. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
6. Enter the MAC and IP addresses, and then click [OK].
To specify these in an IPv6 environment, click [Cancel], and then proceed to Step 8.
• MAC address
Enter the MAC address shown on the network setting list.
• IP address
Enter the user's IP address.
The computer's IP address can be ascertained using Command Prompt.
To display the IP address, open Command Prompt, enter "ipconfig", and then press the
[Enter] key.
Enter the IP address of the computer being used with the variable part in the IP address
modified.
• Subnet mask, Default gateway address
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
CTT190
CTT191
11