Bottom Components - Fujitsu LifeBook A3120 User Manual

falcon2.book Page 10 Thursday, December 21, 2006 10:30 AM
L i f e B o o k A 3 0 0 0 S e r i e s N o t e b o o k - S e c t i o n T w o
Main Unit
Configuration Label
and Certificate of
Authenticity
(approximate
location)
Memory
Upgrade
Compartment

BOTTOM COMPONENTS

The following is a brief description of your LifeBook
notebook's bottom panel components.
Main Unit and Configuration Label
The configuration label shows the model number and
other information about your notebook. In addition, the
configuration portion of the label has the serial number
and manufacturer information that you will need to give
your support representative. It identifies the exact
version of various components of your notebook.
Air Vents
The air vents are used to cool the system to prevent over-
heating
.
To protect your notebook from damage
and to optimize system performance, be
sure to keep all air all vents unobstructed,
clean, and clear of debris. This may
require periodic cleaning, depending upon
the environment in which the system is
used.
Do not operate the notebook in areas
where the air vents can be obstructed,
such as in tight enclosures or on soft
surfaces like a bed or cushion.
10
Air Vents
Figure 2-7. LifeBook notebook bottom panel
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium ion battery.
(See Lithium ion Battery on page 31 for more information)
Memory Upgrade Compartment
Your notebook comes with high speed Double Data Rate
Synchronous Dynamic RAM (DDR SDRAM). The
memory upgrade compartment allows you to expand
the system memory capacity of your notebook, thus
improving overall performance. (See Memory Upgrade
Module on page 40 for more information).
Lithium ion
Battery Bay