Console - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME console - connect to a domain console
SYNOPSIS console [ [-q] -{y|n}] -d domain_id [-f | -r] [-s escapeChar]
console -h
DESCRIPTION The console(8) command connects the XSCF shell console to the console of the
specified domain (domain console).
Domain consoles include a writable console and read-only console. Only one
writable console and multiple read-only consoles can be connected to one domain.
An attempt to set up a connection to another writable console while one writable
console is already connected results in an error. Even in this case, however, a user
with the platadm or domainadm privilege can forcibly establish a connection to a
writable console, in which case the currently connected writable console is
disconnected.
To exit the domain console and return to the XSCF shell console, press the Enter key
and then enter "#" and "." (period).
Note – When you return to XSCF shell console without logging out from the
domain, the return causes automatically logging out from the domain.
You must have one of the following privileges to run this command:
Privileges
platadm, platop, fieldeng
domainadm, domainmgr, domainop
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported.
-d domain_id
-f
-h
-n
-q
Can run this command for all domains.
Can run this command only for your accessible domains.
Specifies only one ID of the domain to which to connect to a
domain console. domain_id can be 0–23 depending on the system
configuration.
Forcibly connects to a writable console. The currently connected
writable console is disconnected. Only users who belong to the
platadm or domainadm privilege can specify this option.
Displays usage statement. When used with other options or
operands, an error occurs.
Automatically answers "n" (no) to all prompts.
Suppresses all messages to stdout, including prompts.

console(8)

System Administration 31