Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 490

switchscf(8)
EXTENDED
DESCRIPTION
EXAMPLES
EXIT STATUS
468 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Switches the state of the XSCF unit to active.
-t Active
Switches the state of the XSCF unit to standby.
-t Standby
Automatically answers "y" (yes) to all prompts.
-y
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n" to
cancel the command.
Switches the state of the XSCF unit that the user is currently logged in to, to
EXAMPLE 1
standby.
switchscf -t Standby
XSCF>
The XSCF unit switch between the Active and Standby states. Continue?
y
[y|n]:
Switches the state of the XSCF unit that the user is currently logged in to, to
EXAMPLE 2
standby. Automatically answers "y" to all prompts.
switchscf -t Standby -y
XSCF>
The XSCF unit switch between the Active and Standby states. Continue?
[y|n]:y
The following exit values are returned:
Successful completion.
0
An error occurred.
>0