Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 46

cfgdevice(8)
Privileges
OPTIONS
EXTENDED
DESCRIPTION
24 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Connection status between I/O unit and the system.
SAS-status
■
■
You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
The following options are supported:
-c attach
-c detach
-h
-l
-M
-n
-p port_no
-q
-y
When the command is executed, a prompt to confirm execution of the command
■
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
enable/disable: Connection setting between I/O unit and
the system. When starting a domain with no I/O unit, the
"disable" may be displayed.
enable: Yes
disable: No
up/down: Logical connection between I/O unit and the
system.
up: Connected.
down: Not connected.
Connects the CD-RW/DVD-RW drive unit and the tape drive
unit to the specified port.
Disconnects the CD-RW/DVD-RW drive unit and the tape
drive unit from the specified port.
Displays usage statement. When used with other options or
operands, an error occurs.
Displays the current status of the CD-RW/DVD-RW drive
unit and the tape drive unit currently set up.
Displays text by page. This option provides a function that is
the same as that of the more command.
Automatically answers "n" (no) to all prompts.
Specifies the number of the port, in the specified domain, to
which the CD-RW/DVD-RW drive unit and the tape drive
unit is to be connected. port_no can be specified in the 'IOU
number-PCI slot number' format. The -p option cannot be
omitted.
Suppresses all messages to stdout, including prompts.
Automatically answers "y" (yes) to all prompts.