Addcodlicense - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME addcodlicense - add a Capacity on Demand (COD) right-to-use (RTU) license key to
the COD license database
SYNOPSIS addcodlicense license-signature
addcodlicense -h
DESCRIPTION addcodlicense(8) adds the COD RTU specified license key to the COD license
database on the Service Processor.
The addcodlicense(8) command is not available on the M3000 server.
When the license key is added, the quantity of headroom is reduced by the quantity
provided by the license key. The quantity of headroom cannot be lower than 0.
Note – Before you run this command, you must obtain a COD license key. To
obtain a license key, contact your sales representative. For details on COD RTU
license keys, refer to the COD User's Guide for your server.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
OPERANDS The following operands are supported:
license-signature
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO deletecodlicense(8), setcod(8), showcod(8), showcodlicense(8),
showcodusage(8)
Displays usage statement.
When used with other options or operands, an error occurs.
Specifies the COD RTU license key to be added to the COD
license database.
Adding a COD RTU License Key

addcodlicense \

XSCF>
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
Successful completion.
An error occurred.
addcodlicense(8)
System Administration 11