NAME
setupplatform - set up platform specific settings
SYNOPSIS
setupplatform [-v]
setupplatform [-v] -p part [-p part]
setupplatform -h
DESCRIPTION
The setupplatform(8) command sets up platform specific settings. The command
leads an administrator through Service Processor installation tasks.
By default, setupplatform command walks through each of the available
settings. Individual settings may be selected using the -p option.
You must have one of the following privileges to run this command:
Privileges
■
■
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported:
-h
-p part
-v
EXTENDED
The available interfaces on the M3000/M4000/M5000 servers are xscf#0-lan#0,
DESCRIPTION
xscf#0-lan#1, lan#0, lan#1. The available interfaces on the M8000/M9000 servers are
the same but they also include the xscf#0-if, xscf#1-lan#0, xscf#1-lan#1, and xscf#1-
if.
In user setup, a new local user account can be created with a user supplied
password.
To use the -p user option: usradm
To use the -p network, -p altitude, -p timezone options: platadm
Displays usage statement. When used with other options or
operands, an error occurs.
Specifies the setting you want to do. One of the following can be
specified for part:
altitude
network
timezone
user
Specifies verbose output.
Configures the chassis altitude.
Configures the XSCF network, DSCP, DNS,
NTP, SSH, https, and SMTP.
Sets the time zone for the XSCF. The time
zone is chosen from a list of time zones.
Creates a new local XSCF user account with
platadm, platop, and useradm privileges.
System Administration
setupplatform(8)
281