Sethttps - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME sethttps - start or stop the HTTPS service, which is used in the XSCF network. This
command also performs authentication-related settings
SYNOPSIS sethttps [ [-q] -{y|n}] -c enable
sethttps -c disable
sethttps -c gencsr country state | province locality organization organizationalunit
common e-mail
sethttps [ [-q] -{y|n}] -c genserverkey
sethttps -c importca
sethttps [ [-q] -{y|n}] -c selfsign country state | province locality organization
organizationalunit common e-mail
sethttps -h
DESCRIPTION The sethttps(8) command starts or stops the HTTPS service, which is used in the
XSCF network. Also, this command performs authentication-related settings for
authentication used in the HTTPS service.
The following authentication-related items can be set:
■
■
■
■
■
XSCF does not support HTTP service. Only HTTPS service is supported.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
Configuring the self-certification authority
Creating a self-signed web server certificate
Creating the private key of the web server
Creating a web server certificate signing request (CSR) to an external certification
authority
Importing a web server certificate signed by an external certification authority

sethttps(8)

System Administration 195