Preface - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

Preface

This manual describes how to use the shell command which can be executed in the
XSCF environment in SPARC Enterprise™ M3000/M4000/M5000/M8000/M9000
servers. The shell command is hereinafter referred to as XSCF shell command.
XSCF is a system monitoring facility to conduct monitoring, control, operation, or
maintenance of main unit and domains of M3000/M4000/M5000/M8000/M9000
servers. It is mounted as a firmware on the service processor which is independent
from the processor of the system. For each command, this manual describes how to
use and the execution examples, available in XSCF environment.
This manual is provided as a manual to study the point which you can't understand
or would like to check on, while using XSCF shell command. Instead of reading from
the start as you do so when reading a tutorial, it is recommended to use this manual
as you come across a point you would like to check on.
The description of XSCF shell command written in this manual is the same as the
manual page which appears as a result of man command executed in XSCF
environment. For how to use the man command, please refer to man(1) in this manual.
In addition, for the detail content of XSCF, please refer to SPARC Enterprise M3000/
M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
This section includes:
"Audience" on page xii
■
"Notation of This Manual" on page xii
■
"SPARC Enterprise Mx000 Servers Documentation" on page xiv
■
"Glossary" on page xviii
■
"Abbreviated References to Other Documents" on page xviii
■
"Models" on page xix
■
"Prompt Notations" on page xx
■
"Software License" on page xx
■
"Fujitsu Welcomes Your Comments" on page xx
■
Preface xi