Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 110

ioxadm(8)
EXIT STATUS
88 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Displaying Locator LED Status for the External I/O Expansion Unit
EXAMPLE 8
ioxadm locator iox@12B4
XSCF>
Location
IOX@12B4
IOX@12B4/PS0
If the FRU service indicator is already on due to a detected fault condition, only the
box locator LED will be set to fast.
Enabling the Indicator for Power Supply 1 When Power Supply 1 Has a Fault
EXAMPLE 9
Indication
ioxadm locator on iox@x031/ps1
XSCF>
ioxadm locator
XSCF>
Location Sensor
IOX@X031 LOCATE
ioxadm env -1 iox@x031/ps1 SERVICE
XSCF>
Location Sensor
IOX@X031/PS1 SERVICE
The External I/O Expansion Unit chassis white LED has an integrated push button.
The button can be used to toggle the state of the chassis white locator LED between
off and fast. If the push button is used to turn off the locator LED, fast blink FRU
service LEDs are cleared.
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
Sensor Value
LOCATE
SERVICE
Value Resolution Units
Fast
Value Resolution Units
On
Resolution
Fast -
Fast -
- LED
- LED
Units
LED
LED