Sony VPL-DX126 VPL-DW126 Operating Instructions Manual

Product manual (vpl-dx146 dw126 operation manual)
Hide thumbs Also See for VPL-DX126 VPL-DW126:

Advertisement

Data
Projector

Operating Instructions

Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-DX146/DX126
VPL-DW126
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
© 2013 Sony Corporation
4-471-528-11 (1)

Advertisement

Table of Contents
loading

Summary of Contents for Sony VPL-DX126 VPL-DW126

  • Page 1: Operating Instructions

    Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-DX146/DX126 VPL-DW126 Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer. © 2013 Sony Corporation...
  • Page 2: Table Of Contents

    Table of Contents Overview Network Location and Function of Controls ..4 Using Network Features ....29 Main Unit ........4 Displaying the Control Window of the Projector with a Web Connector Panel ......5 Browser ........29 Remote Commander and Control Confirming the Information Panel Keys .........
  • Page 3 USB Media Viewer Using USB Media Viewer ....37 Thumbnail Mode ......38 Option Menu .......38 Display Mode ......39 Option Menu .......39 Slideshow Mode ......39 Option Menu .......40 Others Indicators ..........41 Messages List ........42 Troubleshooting .......43 Replacing the Lamp ......45 Cleaning the Air Filter .....47 Specifications ........48 Projection Distance ......53 Dimensions ........58...
  • Page 4: Location And Function Of Controls

    B Overview Location and Function of Controls Main Unit k Connector panel (page 5) l Security bar Connects to a commercially available security chain or wire. m Security lock Connects to an optional security cable manufactured by Kensington. a Focus ring (page 13) For details, visit Kensington’s web site.
  • Page 5: Connector Panel

    Connector Panel Input (pages 8, 10) Others a INPUT A d LAN connector (page 29) Video: RGB/YP input connector e AC IN (∼) socket Audio: Audio input connector Connects the supplied AC power cord. b INPUT B f USB connector (Type A) ( Video: HDMI input connector (pages 11, 37) Audio: HDMI input connector...
  • Page 6 c Operating a menu (page 17) Notes MENU key *1: Use this key when inputting a RESET key computer signal. But it may not be ENTER /V/v/B/b (arrow) keys used depending on the resolution of RETURN key the input signal. *2: Use this key when inputting a d Adjusting the image (page 13) computer signal.You cannot use this...
  • Page 7 3 Select “User” then press the b key. The setting items appear. User Lamp Mode High Auto Power Saving With No Input With Static Signal Lamp Dimming Standard Standby Mode :Sel :Back :Set RETURN 4 Press the V/v key to select the item then press the ENTER key.
  • Page 8: Connecting The Projector

    Notes • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) • The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal.
  • Page 9 USB connector (Type B) ( For connecting to a computer with a USB connector (“Projecting an Image using USB Connection” (page 36)). USB connector USB A-B cable (not (Type A) supplied) Computer LAN connector For connecting to a computer, tablet PC, or smartphone via a hub or router (“Presentation Function via Network”...
  • Page 10: Connecting A Video Equipment

    • When wirelessly connecting a tablet PC/smartphone to the projector via USB wireless LAN module IFU-WLM3 (supplied), set “Access Point Setup” to “Manual” in the projector’s “WLAN Settings” (page 25). Connecting a Video equipment Connections with a DVD player or BD player are explained for each input signal. VIDEO For connecting video equipment with a video output connector.
  • Page 11: Connecting A Usb Memory Device

    Notes • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) • The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal.
  • Page 12: Projecting/Adjusting An Image

    B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances “Projection Distance” (page 53) and projected image sizes, see Video equipment Projector...
  • Page 13: Adjusting The Projected Image

    Adjust the focus, size and position of the projected image (page 13). Adjusting the Projected image Focus Size (Zoom) Position Zoom ring Foot adjust button Front foot (adjustable) Focus ring Rear feet (adjustable) Projecting an Image...
  • Page 14 Adjusting the tilt of the projector with the foot adjust button/rear feet (adjustable) By changing the tilt of the projector with the foot adjust button/rear feet (adjustable), you can adjust the position of the projected image. 1 Press and hold the foot adjust button, then lift up the front of the projector to adjust the angle.
  • Page 15 Correcting trapezoidal distortion of the projected image (Keystone feature) Keystone feature may not work automatically when the screen is tilted. In this case, set keystone manually. 1 Press the KEYSTONE key on the remote commander or select V Keystone in the Installation menu.
  • Page 16: Turning Off The Power

    Turning Off the Power Press the ?/1 key on the unit or the remote commander. The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds of the message being displayed, shutdown is canceled. Unplug the AC power cord from the wall outlet. To turn off without displaying confirmation message Press and hold the key on the unit for a few seconds (page 42).
  • Page 17: Using A Menu

    B Adjustments and Settings Using a Menu Using a MENU Note The menu displays used for the explanation below may be different depending on the model you are using. operations in step 3 and then press the Press the MENU key to display the ENTER key to register the setting.
  • Page 18: The Picture Menu

    The Picture Menu The Picture is used to adjust the picture for each input signal. Items Item descriptions Picture Mode Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture. Standard: Provides an image which is natural and well balanced. Presentation : Provides a bright image, suitable for presentations.
  • Page 19: The Screen Menu

    The Screen Menu The Screen menu is used to adjust the size, position and aspect ratio of the projected image for each input signal. Items Item descriptions Aspect Changes the aspect ratio of the projected image (page 21). VPL-DX146/DX126: 4:3: Displays the image to fit the maximum projected image size When the computer with an aspect ratio fixed to 4:3.
  • Page 20 Items Item descriptions Adjust Signal Adjusts the image of a computer signal. Use this item if the edge of the image is cut, or is not displayed properly. *2 *3 Automatically adjusts the projected image to an optimum quality when you press the ENTER key (page 6). Phase Adjusts the dot phase of the display pixel and the input signal.
  • Page 21 Aspect VPL-DX146/DX126 *1: If you select “Normal,” the image is projected in the same resolution as the input signal without changing the aspect Input signal Recommended setting value and ratio of the original image. projected image Full1 *2: If you select “4:3,” the image is projected to fit the projected image size, regardless of the aspect ratio of the image.
  • Page 22 VPL-DW126 *1: If you select “Normal,” the image is projected in the same resolution as the input signal without changing the aspect Input signal Recommended setting value and ratio of the original image. projected image *1 *2 *3 Full1 *2: If you select “Full2,” the image is projected to fit the projected image size, regardless of the aspect ratio of the image.
  • Page 23: The Function Menu

    The Function Menu The Function menu is used for setting various functions of the projector. Items Item descriptions Volume The higher the value, the louder an audio volume and the lower the value, the lower the audio volume. Smart APA On/Off: When set to “On,”...
  • Page 24: The Operation Menu

    Note *1: You will not be able to use the projector if you forget your password. If you call qualified Sony personnel because you have forgotten the password, you will be asked to verify the projector’s serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password.
  • Page 25: The Connection/Power Menu

    The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. Items Item descriptions LAN Settings IP Address Auto (DHCP): The IP address is assigned automatically from the Setup DHCP server such as a router. Manual: To specify the IP Address manually. WLAN Settings WLAN On/Off: Set the wireless output of the USB wireless LAN module...
  • Page 26 Items Item descriptions Direct Power On On/Off: When set to “On,” you can turn the power on without going to Standby mode when the AC power cord is connected to a wall outlet. With the projector turned off, you can also unplug the AC power cord without going to Standby mode, regardless of the Direct Power On setting.
  • Page 27: The Installation Menu

    The Installation Menu The Installation menu is used for installing the projector. Items Item descriptions Image Flip HV/H/V/Off: Flips the projected image horizontally or vertically according to the installation method. Installation Attitude Right Side Up/Upside Down/Link to Image Flip: Change the cooling setting to suit to the installation attitude.
  • Page 28: The Information Menu

    The Information Menu The Information menu is used to check projector status, such as total usage time of the lamp. Items Item descriptions Model Name Displays the model name. Serial No. Displays the serial number. fH/fV Displays the horizontal/vertical frequency of the current input signal. Signal Type Displays the type of the current input signal.
  • Page 29: Using Network Features

    For download or detailed method of using Projector Station for Network Control, please access the following URL. http://pro.sony.com/bbsc/ssr/cat-projectors/resource.downloads Contact your local Sony dealer for detailed information of Projector Station for Network Control. Displaying the Control Window of the Projector with a Web Browser Connect the LAN cable (page 9).
  • Page 30: Confirming The Information Regarding The Projector

    When you change the password, input a new the remote commander. password after deleting the password (*****) that was set. Note If you forget your password, consult with qualified Sony personnel. Using Network Features...
  • Page 31: Using The E-Mail Report Function

    Mail Report button Using the e-mail report Function Set the e-mail report function on the Setup page. Entered values will not be applied unless you click on [Apply]. Click on [Owner information] to enter the owner information recorded in the e-mail report.
  • Page 32 SMTP Authentication: Check this check box to arrange for SMTP authentication to be performed before sending e-mail. Account Name: Enter the mail account name. Password: Enter the password. Confirm the contents of the e-mail report. When you click on [View], the contents of the e-mail report are displayed.
  • Page 33: Presentation Function Via Network

    Presentation Function via Network requires installation of Projector Station for Network Presentation (supplied CD-ROM). For information on updates of Projector Station for Network Presentation, visit Sony’s web site: https://www.servicesplus.sel.sony.com/ System requirements for using the application are as follows. WindowsXP: Home/Professional (recommended)
  • Page 34: Projecting An Image

    Note Projecting an Image Display related settings (such as your After starting Projector Station for Network computer’s resolution) change when the Presentation, the connection setting window application is started. appears. Connection Settings Find projectors connected to the network. Item Item descriptions Click “Search”...
  • Page 35: Using The Controller

    Using the Controller Displaying Images or Files Sent from a Tablet PC/ Smartphone Network Presentation You can project JPEG images, PDF files, etc. stored in a tablet PC/smartphone wirelessly by using a specific application. For downloading or detailed method of using the application, access the following User 000001 URL.
  • Page 36: Projecting An Image Using Usb Connection

    B Projecting an Image using USB Connection Projecting an Image using USB Connection You can also project an image simply by connecting the projector and computer with a USB A- B cable (not supplied). Projecting an image using USB connection requires to start USB Display. System requirements for using the application are as follows.
  • Page 37: Usb Media Viewer

    B USB Media Viewer Using USB Media Viewer You can browse image files stored in a USB memory device inserted in the USB connector of the projector, without using a computer. Supported storage media and file format: • Supported storage media: USB flash memory •...
  • Page 38: Thumbnail Mode

    Thumbnail Mode The image files in the folder are displayed as a thumbnail list. Option menu Press the V/v/B/b key on the remote commander to select an image, then press the ENTER key. The option menu appears in the lower part of the screen. Option Menu You can select the display order of thumbnails and display method of image files.
  • Page 39: Display Mode

    Display Mode In display mode, you can view a selected image in full screen view. Option menu Press the ENTER key on the remote commander. The option menu appears in the lower part of the screen. Option Menu Items Item descriptions Hide the option menu.
  • Page 40: Option Menu

    Option Menu Items Item descriptions Hide the option menu. Return to the thumbnail mode (page 38). Display the previous image. Display the next image. Press the V/v key to change the slideshow time interval. Slideshow time interval After 3 seconds, display the next image. After 5 seconds, display the next image.
  • Page 41: Indicators

    The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If a symptom persists, despite having taken measures below, consult with qualified Sony personnel. Flashes twice The internal temperature is unusually high. Check the items below.
  • Page 42: Messages List

    Messages List When any of the messages listed below appears on the projected image, address the problem in accordance with the table below. Messages Meaning/Remedy Page High temp.! Lamp off in Check the items below. 4, 4, 1 min. • Check if nothing is blocking the ventilation holes. 27, 47 •...
  • Page 43: Troubleshooting

    Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptoms Remedy Page The power is not turned Check if the AC power cord is firmly connected. – When the “Control Key Lock” is set to “On,” you cannot turn on the projector using the ?/1 key on the projector.
  • Page 44 Symptoms Remedy Page The image is dark/too The settings for “Brightness,” “Contrast,” and “Lamp Mode” 18, 25 bright. affect brightness of the image. Check if the value is appropriate. The image will be dark when the lamp is burnt out. Check 28, 45 “Lamp Timer,”...
  • Page 45: Replacing The Lamp

    Do not put your hands into the slot. Notes • If the lamp breaks, contact qualified Sony personnel. Do not replace the lamp yourself. • When removing the lamp, be sure to pull it out straight, by holding the designated location.
  • Page 46 Connect the AC power cord to a wall Caution outlet and turn on the projector. Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid Reset the lamp timer for notification of electrical shock or fire.
  • Page 47: Cleaning The Air Filter

    If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on purchasing/fitting a new air filter, consult with the store where you purchased the projector, or contact qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it.
  • Page 48: Specifications

    Specifications Items Descriptions Model VPL-DX146/DX126/VPL-DW126 Projection system 3 LCD system Display device Effective display VPL-DX146/DX126: 0.63 inch (16.0 mm), size 3 plate panels, Aspect ratio 4:3 VPL-DW126: 0.59 inch (15.0 mm), 3 plate panels, Aspect ratio 16:10 Effective picture VPL-DX146/DX126: 2,359,296 pixels (1024 × 768 elements pixels, 3 plate panels) VPL-DW126: 3,072,000 pixels (1280 ×...
  • Page 49 Items Descriptions Model VPL-DX146/DX126/VPL-DW126 INPUT OUTPUT INPUT A RGB/YP input connector: Mini D-sub 15 pin (Computer/video) female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P : 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms...
  • Page 50 Design and specifications of the unit, including the optional accessories, are subject to change without notice. Notes • Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF...
  • Page 51 Pin assignment HDMI connector (HDMI, female) RGB input connector (Mini D-sub 15-pin, female) T.M.D.S. T.M.D.S. Data2+ Clock Shield T.M.D.S. T.M.D.S. Video input Power supply Data2 Shield Clock – (red) R input for DDC T.M.D.S. N.C. Video input Data2 – (green) G T.M.D.S.
  • Page 52 Input connector Acceptable Input Signals fH[kHz]/ Resolution RGB/ fV[Hz] HDMI Computer signal Input connector 1280 × 800 49.7/60 fH[kHz]/ Resolution RGB/ fV[Hz] HDMI Digital TV signal 640 × 350 31.5/70 Input connector 37.9/85 Signal fV[Hz] RGB/ HDMI 640 × 400 31.5/70 37.9/85 480i...
  • Page 53: Projection Distance

    (top for ceiling mount) to A (determined by drawing a perpendicular line from the center of the lens to projected image surface). Caution Never mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). Floor Installation Projection distance L Projected...
  • Page 54 Ceiling Installation Height H from center of lens to edge of screen Center of lens Top side Projected image Projection distance L L: Projection distance L H: Height H from center of lens to edge of screen Projection Distance...
  • Page 55 Projection distance table (VPL-DX146) Unit: m (inches) Height H from center of lens to edge Projected image size of screen Projection Minimum Maximum Distance L Diagonal D Width × Height Projection Projection Distance L Distance L 80 inch (2.03 m) 1.63 ×...
  • Page 56 Projection distance table (VPL-DX126) Unit: m (inches) Height H from center of lens to edge Projected image size of screen Projection Minimum Maximum Distance L Diagonal D Width × Height Projection Projection Distance L Distance L 80 inch (2.03 m) 1.63 ×...
  • Page 57 Projection distance table (VPL-DW126) Unit: m (inches) Height H from center of lens to edge Projected image size of screen Projection Distance L Minimum Maximum Diagonal D Width × Height Projection Projection Distance L Distance L 80 inch (2.03 m) 1.72 ×...
  • Page 58: Dimensions

    Dimensions 315 (12 VPL-DX146/VPL-DW126 Edge of lens VPL-DX126 Edge of lens Unit: mm (inches) Front 157.5 (6 81 (3 26 (1 Unit: mm (inches) Dimensions...
  • Page 59 Side 69 (2 113 (4 69 (2 31 (1 Unit: mm (inches) Rear 16.8 ( 164.4 (6 28 (1 157.5 (6 252.5 (9 Unit: mm (inches) Dimensions...
  • Page 60 Bottom 38.8 (1 78.9 (3 76.4 (3) 88.5 (3 23.9 ( 271 (10 22 ( Unit: mm (inches) Dimensions...
  • Page 61: Index

    Index H (Horizontal) ......... 20 High Altitude Mode ........ 27 Hue ............18 AC IN ............5 Acceptable input signal ......52 Image Flip ..........27 Adjust Signal ...........20 Information menu ........28 Air filter ...........47 Input ............5 Air filter cover/Ventilation holes Installation Attitude ........
  • Page 62 About Trademarks Rear feet (adjustable) ......4, 14 • Adobe and Adobe Acrobat are trademarks Remote commander ........5 or registered trademarks of Adobe Remote control detector ......4 Systems Incorporated in the United States Replacing the lamp ......... 45 and/or other countries.
  • Page 63 Sony Corporation...

This manual is also suitable for:

Vpl-dx146

Table of Contents