Advertisement
Quick Links
24v driveN, FTP-607 Series
2" HiGH SPeed THerMaL PriNTer
FTP-627MCL401/601
n Overview
The FTP-627 MCL Series are 24V driven high-speed printers
with a ultra low profile auto cutter and long life.
The FTP-627 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.
n HiGHLiGHTS
• Ultra low profile
Height 21.8 mm, width 81.2 mm, depth 42.2 mm
• High speed printing
It can print at 100/150 mm/s (800 dotlines/s) maximum by
using Fujitsu's unique head drive control.
• Auto Cutter
Long life and high reliable guilotine with dedicated motor.
• Easy paper setting
Our lever platen release mechanism allows a
wide paper route, so paper can be easily inserted.
Conventional auto loading is also available.
• Multifunctional die-cast frame
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
• RoHS compliant
FTP-627MCL401/601
FTP-627MCL401/601
FTP-627DSL291R
FTP-627DSL601R
Advertisement
Related Manuals for Fujitsu FTP-607 Series
Summary of Contents for Fujitsu FTP-607 Series
- Page 1 Height 21.8 mm, width 81.2 mm, depth 42.2 mm • High speed printing It can print at 100/150 mm/s (800 dotlines/s) maximum by using Fujitsu's unique head drive control. • Auto Cutter Long life and high reliable guilotine with dedicated motor. • Easy paper setting Our lever platen release mechanism allows a wide paper route, so paper can be easily inserted.
-
Page 2: Part Numbers
n ParT NuMberS Easy Load Model with low profile cutter LSI for driving MCL401 MCL601 Interface Cutter MCL401 board for supported MCL601 Mech/Cutter MCL401 MCL601 Interface Parallel (Centronics) cables Serial (RS232C) Power Logic cables Head, motor n SPeCiFiCaTiONS Item Part number Printing method Dot structure Dot pitch (Horizontal) - Page 3 n SPeCiFiCaTiONS Item Iterface Power supply For print head MCL401 MCL601 For motor MCL401 MCL601 For cutter MCL401 MCL601 For logic Dimensions Mechanism with cutter Interface DSL291 board DSL6xx Weight Mechanism with cutter Interface board Life Head MCL401 MCL601 Cutter MCL401 MCL601 Platen...
- Page 4 Blow-out fuse detection Head voltage abnormality detection n diMeNSiONS 1. Printer mechanism 10.7 Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.
- Page 5 FTP-627MCL401 1. Connector (FPC) specification (CN3/CN10) (1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-2471 (made by Molex) (2) Pin assignment on the mechanical side — — — — t s i — — — FTP-627MCL401/601 c t i c t i...
- Page 6 FTP-627MCL601 1. Connector (FPC) specification (CN4) (1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-3071 (made by Molex) (2) Pin assignment on the mechanical side Symbol Signal Name Cathode for photo interrupter VSEN Paper sensor power Emitter for photo interrupter Head drive power Head drive power Head drive power Data in...
- Page 7 Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.