Mount The Oven - GE JNM7196SFSS Installation Instructions Manual

MOUNT THE OVEN

C4
CAUTION:
IMPORTANT: Do not grip or use handle during
installation.
WARNING:
power supply cord hole with the power supply cord
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
NOTE: When mounting
the microwave, thread
power cord through hole
in bottom of top cabinet.
Keep it tight throughout
Steps 1–3. Do not pinch
cord or lift oven by pulling
cord.
2 Rotate front of oven up
against cabinet bottom.
Installation Instructions
1 Lift microwave, tilt it
forward, and hook slots
at back bottom edge
onto four lower tabs of
mounting plate.
3
Insert a self-aligning screw through top-center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after
the threads have engaged. (It will be completely
tightened later.)
Cabinet Front
Cabinet Bottom Shelf
Oven Top
4
Insert 2 self-aligning screws
(
1 4
top cabinet holes. Turn two full
turns on each screw.
5 Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
Install grease filters. See the Owner's Manual
6
packed with the oven.
21
Filler Block
This distance
can NOT
Equivalent
exceed 2"
to Depth
to ensure
of Cabinet
proper
Recess
installation
Self-Aligning Screw