Removing the Battery
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Close the display and turn the computer over.
2
Slide the battery latches on each end of the battery bay to the unlock position.
You hear a click when the battery is unlocked.
3
Lift the battery off the computer base.
2
1
1
battery latches (2)
4
Turn the computer over and open the display as far as possible.
5
Press and hold the power button for 5 seconds, after the computer is unplugged, to
ground the system board.
10
|
Removing the Battery
2
battery