Contents 01 Safety Warnings Welcome........................2 Important safety information ..................3 Safety notice ........................ 4 Electrical connections ....................5 02 About your LED LCD TV Get to know your TV ....................6 Get to know your remote control.................. 8 Setting Up Your LED LCD TV..................9 Preparation of your TV ....................
Safety Warnings LED LCD TV. LED LCD TV Scart to YPbPr adapter Power Adaptor Power Cable TV Stand BUSH HD Ready LED LCD TV User Manual Helpline: 0845 604 0105...
About your LED LCD TV GET TO KNOW YOUR TV Front/Left /Right Side View and Controls Front View Right Side View Left Side View Infrared Receiver The LED light indicates when the LED LCD TV is activated. VOL+- Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode.
Page 8
GET TO KNOW YOUR TV Rear View and Jacks Not Wall Mountable EARPHONE Connects to the external headphone for private listening. SPDIF OUT Connects to the audio jack on the digital/ standard 5.1 audio system. HDMI IN Connects the all digital AV equipment with HDMI connector.
SETTING UP YOUR LED LCD TV How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains: LED LCD TV Stand Cover an even stable surface with a soft cloth.
shall not be exposed to Batteries ( Battery pack or batteries installed ) excessive heat such as sunshine fire or the like. BUSH HD Ready LED LCD TV User Manual Helpline: 0845 604 0105...
Getting Started Refer to the owner’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black &...
Page 13
Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF...
Page 14
Cable TV (CATV) Connection A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75- ohm cable into the ANT. terminal. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Page 15
Use a supplied antenna cable to connect the TV signal to the LED LCD TV’s TV CABLE terminal. VHF/UHF IN Connect the DC plug of the AC-DC adapter to the DC 12V port at the rear of the TV. Connect the power cord to the AC-DC adapter and wall outlet. Press the button on the remote to turn on the LED LCD TV.
Page 16
country you are in. ( e.g. UK ) Press and digital) will be stored after the process. This search programe is used for initializtion tunning, you can tune your TV form “Auto Scan” in CHANNEL menu (instruction in Page 32), the search programe is same as initializtion tunning.
How to connect CI (Common Interface) card Connects CI(Common Interface) card To view the scrambled (pay) services in digital TV mode. TO INSERT A CI CARD TO REMOVE A CI CARD When removing the CI card, do pull it from its slot. This function enables you to watch the scrambled services (pay services) in some channels.
Connecting an A/V Device with SCART Connector Rear of TV CABlE/AIR DVD PLAYER SCART Cable Use a SCART cable to connect the external A/V device ’s SCART socket to the LED LCD TV’s SCART jack. Connect all AC power sources, before turning on the power switch of the LED LCD TV or other connected equipment.
Connecting an A/V Device with YPbPr Connector Rear of TV CABlE/AIR SCART-to-YPbPr adapter (Included) DVD PLAYER YPbPr Cable Use a SCART-to-YPbPr adapter to connect the LED LCD TV’s SCART jack with the YPbPr/ Audio cable and the ’s YPbPr output jacks. external A/V device Connect all AC power sources, before turning on the power switch of the LED LCD TV or other connected equipment.
Connecting an AV Equipment with HDMI Connector Rear of TV CABlE/AIR HDMI Cable AV EQUIPMENT Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LED LCD TV’s HDMI IN jacks. Connect all AC power sources, before turning on the power switch of the LED LCD TV or other connected equipment.
Connecting an AV Equipment with DVI Connector Rear of TV CABlE/AIR AUDIO Cable AUDIO HDMI-to-DVI Cable DVI IN AV EQUIPMENT Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LED LCD TV’s HDMI IN jacks. Use an audio cable to connect the AV equipment’s audio output jacks to LED LCD TV’s...
Connecting a PC Rear of TV CABlE/AIR AUDIO Cable VGA Cable Use a D-SUB cable to connect the PC’s D-SUB output jack to the LED LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LED LCD TV’s. Connect all AC power sources, before turning on the power switch of the LED LCD TV or other connected equipment.
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System For better sound quality, you may want to play the LED LCD TV audio through your stereo system. Rear of TV CABlE/AIR AUDIO Cable Audio Receiver Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LED LCD TV’s COAXIAL audio jacks.
Using The Features Using the Programme Guide The Programme Guide is an Electronic Programme guide that provides viewers with a quick and easy way to view a complete list of digital of programmes. The Programme Guide feature brings all sorts of information to your screen, such as program title, program duration, time remaining, rating information, availability, etc.
Page 25
The Programme Guide features are displayed at the botton of the screen. Use the color keys ( red, green,yellow, blue) on remote control to activate. Programme Guide ITV1 06:00 - 06:58 GMTV Newshour 13 May 2008 0633 30 May 06:30 07:30 1 ITV1 GMTV Newshour...
Page 26
Schedule List (green key) The feature shows the list of reminding programmes. SCHEDULE LIST 13 May 2008 0633 Title Time Date Programme Mode Freshly Squeezed 07:00 Wed. 7 May 4 Channels 4 Just shoot me 09:00 Wed. 7 May 4 Channels 4 Jushannel 4 6 More4 Press...
Customizing the PICTURE Settings Press the button to turn the LED LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the Picture. Use the change the setting, and press the MENU to exit the menu. PICTURE Picture Mode User...
Page 28
The PICTURE menu includes the following options: Picture Mode Cycles among display types: User/Mild/Standard/Dynamic User: Allows to store your preferred settings. PICTURE Picture Mode User Contrast Brightness Color Sharpness Tint EXIT Quit Back Select Contrast Controls the difference between the brightest and darkest regions of the picture.
Customizing the SOUND Settings Press the button to turn the LED LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the SOUND. Use the change the setting, and press the MENU to exit the menu. SOUND Sound Mode User...
Customizing the TIME Settings Press the button to turn the LED LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the TIME. Use the change the setting, and press the MENU to exit the menu. TIME Clock _ _ _ _...
Customizing the OPTION Settings Press the button to turn the LED LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the OPTION. Use the change the setting, and press the MENU to exit the menu. OPTION OPTION Language...
Page 32
Software Update Selects for software upgrades by channel. Upgrades the software using the broadcasting signal. If the function is selected during the software transmission period, this function searches for available software and downloads the software and the “Do System Update” option is changed to highlight.
Customizing the CHANNEL Settings Press the button to turn the LED LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the CHANNEL. Use the buttons to change the settings, and press the MENU exits the menu. CHANNEL Auto Scan DTV Manual Scan...
Page 34
Programme Edit Allows DELETE/RENAME/MOVE/SKIP of channels on the channel list. Programme Edit 800 SZTVM01 801 SZTVM01 800 SZTVM01 801 SZTVM01 78 BBC 7 30 CBBC Channel DELETE (red button) Press the red button on the remote control with the selected channel, then press it again if you wish to delete it.
Customizing the LOCK Settings Press the button to turn the LED LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the LOCK. Use the to change the settings, and press the MENU exits the menu. LOCK Lock Channel Change Password...
Page 36
Block Program Selects to setup the TV Programme Lock options: Press OK button to display the Block Programme menu: Block Program 1 C-25 2 C-28 EXIT Press buttons to move to the channel you want to block. Press Green button to block the programme, a padlock icon will appear.
Using The Features BUSH HD Ready LED LCD TV User Manual Helpline: 0845 604 0105...
Page 38
19” 22” SCART (YPbPr) / AUDIO IN / SCART / VGA / HDMI / DIGITAL OAXIAL / HEADPHONE / VHF / UHF IN ~100-240V 50/60 Hz 461.5 x 160 x 340.5 mm 528.8 x 160 x 384.8 mm Dimension ( W x D x H ) 3.3 kg 3.9 kg Weight ( Net )