Removal steps of I/O sub card with USB connector
Step
Screw (quantity)
3
M2 × 3 mm, wafer-head, nylon-coated (1)
When installing: Ensure that the connector is attached firmly to the system board.
1130 CRT board assembly (with cable)
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Bottom slot cover" on page 57
•
"1070 Keyboard" on page 66
•
"1090 Keyboard bezel" on page 68
72
Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)