Connectors And Headers - Intel DB85FL Specification

Intel Desktop Board DB85FL Technical Product Specification
2.2

Connectors and Headers

CAUTION
Only the following connectors and headers have overcurrent protection: back panel
and front panel USB.
The other internal connectors and headers are not overcurrent protected and should
connect only to devices inside the computer's chassis, such as fans and internal
peripherals. Do not use these connectors or headers to power devices external to the
computer's chassis. A fault in the load presented by the external devices could cause
damage to the computer, the power cable, and the external devices themselves.
Furthermore, improper connection of USB header single wire connectors may
eventually overload the overcurrent protection and cause damage to the board.
This section describes the board's connectors. The connectors can be divided into
these groups:
Back panel I/O connectors
•
Component-side connectors and headers (see page 42)
•
40