Installation On A Mac Os X - FujiFilm FINEPIX FinePix S3500 Owner's Manual

5.3 INSTALLATION ON A Mac OS X

Pre-installation checklist
■ Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible Mac
Operating System
RAM
Hard disk space
Display
✽2
Internet connection
✽1 Models with a USB port as a standard feature
✽2 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
◆ ◆
Notes
i Connect the camera directly to the Macintosh using the USB cable (included). The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i On Macintosh PCs, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is
used. If other applications will be used at the same time, allocate the additional amount required for
those applications also.
✽1
Power Macintosh G3 , PowerBook G3
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, or PowerBook G4, Power Macintosh G5
Mac OS X (compatible with version 10.2.6 to 10.3.3)
192 MB minimum
256 MB or better recommended
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 for FinePix: 2 GB or better)
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 for FinePix: 1024 × 768 or better)
i To use the FinePix Internet Service or mail attachment function
An Internet connection and e-mail transmission software
i Connection speed: 56 k or better recommended
✽1
,
5
69