SET-UP
■ SET-UP menu options
Settings
IMAGE DISP.
POWER SAVE
1
FORMAT
§ BEEP
DATE/TIME
TIME
DIFFERENCE
FRAME NO.
2
USB MODE
VIDEO SYSTEM
DISCHARGE
3
qRESET
60
Display
Factory default
ON/OFF
ON
2 MIN/5 MIN
2 MIN
OK
–
LOW/HIGH/OFF
LOW
SET
–
SET
–
CONT./RENEW
CONT.
¶/qWEB/®
¶
ENGLISH
NTSC/PAL
–
OK
–
OK
–
Explanation
Specifies whether the preview images (the photographed
images) are displayed after taking a picture.
The image appears for a few moments and is then recorded.
Reduces the camera's power consumption and
subsequently turns the camera off when not being used.
Erases all files.
Sets the volume of the tone emitted when the camera
controls are used.
Corrects the date or time.
Specifies the time difference settings.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
This mode provides a simple way to read images
¶
from an xD-Picture Card and store images onto an
xD-Picture Card.
This function allows you to conduct videoconferencing
qWEB
sessions between PCs connected to the Internet.
If a printer that supports PictBridge is available,
images can be printed by connecting the camera
®
directly to the PictBridge-compatible printer without
using a PC.
Specifies the language used for screen display.
Specifies whether video output is set to NTSC or PAL.
Discharges rechargeable batteries.
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, LANG. and VIDEO SYSTEM) to the
factory default values set at shipment. A confirmation
message appears when you press "c". To reset the camera
settings, press the "MENU/OK" button again.
Page
–
61
61
–
13
62
63
73
74
✽ Windows SP1 only
76
–
–
87
–