Flash Brightness Adjustment; Dev (Exposure Compensation) - FujiFilm FINEPIX FinePix S3500 Owner's Manual

z FLASH BRIGHTNESS ADJUSTMENT
ＦＬＡＳＨ ＦＬＡＳＨ
＋０．３ ＋０．３
０
−０．３ −０．３
−０．６ −０．６
D EV ( EXPOSURE COMPENSATION )
ＥＶ ＥＶ
＋０．６ ＋０．６
＋０．３ ＋０．３
０
−０．３ −０．３
◆
To obtain the optimum brightness
Adjust the exposure compensation according to the level of brightness or darkness in the image.
h When the subject appears too bright,
try a negative (–) compensation setting.
This will make the overall image darker.
■ Guide to compensation
i Backlit portraits: +0.6 EV to +1.5 EV
i Very bright scenes (such as snowfields) and highly reflective subjects: +0.9 EV
i Shots made up predominantly of sky: +0.9 EV
i Spotlit subjects, particularly against dark backgrounds: –0.6 EV
i Scenes with low reflectivity, such as shots of pine trees or dark foliage: –0.6 EV
Select Flash brightness in the "
mode. Use this setting to change the amount of
light emitted by the flash to suit the photography
conditions or to achieve a desired effect.
h Compensation range: ±2 leveles
–0.6 EV to +0.6 EV in approx. 0.3 EV increments
(total: 5 levels selectable)
See P.95 for information on EV.
●
!
Depending on the type of subject and the shooting distance,
brightness adjustment may have no effect.
s
Select EV in the " " Photography mode.
Use this function for shots to get the correct
brightness (exposure), such as shots with
extremely high contrast between the subject and
the background.
h Compensation range
–2.1 EV to +1.5 EV (13 steps in 0.3 EV increments)
See P.95 for more information on EV.
●
!
Exposure compensation is disabled in the following
situations:
i
When the flash is used in Auto or Red-eye reduction mode
i
When dark scenes are shot in Forced flash mode
◆
h When the subject appears too dark,
try a positive (+) compensation setting.
This will make the overall image brighter.
s
" Photography
3
41