FujiFilm FinePix FinePix F710 Owner's Manual Page 31
Fujifilm digital camera finepix f710 owner's manual.
STILL PHOTOGRAPHY MENU
STILL PHOTOGRAPHY MENU
3
ＣＯＭＰＬＥＴＥＤ ！
ＭＰＬＥＴＥＤ ！
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
Ｐ
１９
１９
ＯＶＥＲ
ＯＶＥＲ
ＵＮＤＥＲ
ＵＮＤＥＲ
or
ＯＶＥＲ
ＯＶＥＲ
ーーーー Ｆーーー
ーーーー
ーーー
◆
◆
Example
You can change the white balance for a photographed image by using colored paper instead of white
paper.
60
✽ Displaying the menus (➡P.57)
When the correct exposure is measured,
"
ç
" appears.
Press the "MENU/OK" button to confirm the setting.
●
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is removed.
●
!
After taking the picture, check the "Color (White Balance)"
setting for the image.
i Set "IMAGE DISP." to "PREVIEW" in the SET-UP screen
(➡P.87).
i Set the Power switch to "
w
" (➡P.29).
√
∫
When "
" or "
" appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when "
√
" appears and a
∫
positive value (+) when "
" appears.
+ FOCUSING
Available Photography mode:
ＦＯＣＵＳＩＮＧ
ＦＯＣＵＳＩＮＧ
ＭＦ ＭＦ
ＡＦ ＡＲＥＡ
ＡＦ ＡＲＥＡ
ＡＦ （ＭＵＬＴＩ）
ＭＵＬＴＩ）
ＡＦ （ＣＥＮＴＥＲ）
ＣＥＮＴＥＲ）
●
!
See P.52 for information on Continuous AF.
Ｐ
１９
１９
２５０ Ｆ５．６
２５０
Ｆ５．６
１９
１９
Ｐ
２５０ Ｆ５．６
２５０
Ｆ５．６
２５０
２５０ Ｆ５．６
Ｆ５．６
２５０
２５０ Ｆ５．６
Ｆ５．６
２５０
２５０ Ｆ５．６
Ｆ５．６
MF ( Manual Focus )
AF AREA
AF ( MULTI )
AF ( CENTER )
AF ( CENTER )
The camera focuses on the center of the LCD
monitor. Use this setting when taking pictures using
AF/AE lock (➡P.26).
AF ( MULTI )
Pressing the Shutter button down halfway, the
camera recognizes any strongly contrasting subject
near the center of the LCD monitor and displays
the AF frame over subject in focus.
●
!
When taking pictures in Macro mode, the camera focuses on
the center of the LCD monitor.
Care is required when taking pictures using the
viewfinder as you cannot check the focus.
After taking the picture, play it back to check the
focus.
For a high-contrast subject in
the center of the LCD monitor
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject at or near the center of the image.
When there is no high-contrast subject
in the center of the LCD monitor
If the camera has difficulty focusing on the subject
in AF (MULTI) mode, set the focusing mode to
AF(CENTER) and use AF/AE Lock (➡P.26).
Continued
3
61
Comments to this Manuals
Latest comments: