LG P970G User Manual page 32

Safety Guidelines
required to reach the network, in
general, the closer you are to a
wireless base station antenna, the
lower the power output.
Before a phone model is available
for sale to the public, it must be
tested and certified to the FCC that it
does not exceed the limit established
by the government adopted
requirement for safe exposure. The
tests are performed in positions and
locations (e.g., at the ear and worn
on the body) as required by the FCC
for each model.
The highest SAR value for this
model phone when tested for use
at the ear is 1.XX W/kg and when
worn on the body, as described in
this user's manual, is 0.XX W/kg.
(Body-worn measurements differ
among phones models, depending
upon available accessories and
FCC/IC requirements.) While there
may be differences between SAR
levels of various phones and at
various positions, they all meet the
32
government requirement for safe
exposure.
The FCC has granted an Equipment
Authorization for this model
phone with all reported SAR levels
evaluated as in compliance with the
FCC RF emission guidelines. SAR
information on this model phone
is on file with the FCC and can
be found under the Display Grant
section of http://www.fcc.gov/oet/
ea/fccid after searching on FCC ID:
BEJP970.
Additional information on Specific
Absorption Rates (SAR) can be found
on the Cellular Telecommunications
Industry Association (CTIA) website
at http://www.ctia.org/
* In the United States and Canada,
the SAR limit for mobile phones
used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of
tissue. The standard incorporates a
substantial margin of safety to give
additional protection for the public