Table of Contents
Advertisement
1.2
About Fonts
This section explains the fonts that can be used in the ESC/P emulation mode.
Usable Fonts
The following fonts can be used in ESC/P emulation.
Outline Fonts
Chinese fonts
• ShuSongTi
• FangSongTi
• KaiTi
• HeiTi
European fonts
• Roman
• Sans Serif
• OCR-B
User-defined Fonts (Specially Registered Fonts)
User-defined fonts (specially registered fronts) can be used on this printer. User-defined
fonts can be stored only in memory. This means that they are erased from memory when
this printer is switched off. Note, however, that when an optional hard disk is installed,
user-defined fonts are stored on hard disk, and are held even if this printer is switched off.
The amount of user-defined fonts that can be saved registered on hard disk is the same as
when they are stored to memory.
User-defined fonts are registered as bitmap fonts. User-defined fonts are not shared
between print languages
Font Cache
To ensure high-speed printing, outline fonts are cached if they are not too large.
Outline fonts are converted to bit map data temporarily and then printed. To minimize this
processing time, the processed bit map data is saved in the memory.
This process is called font cashing.
The saved bit map data is erased at power-off or system reset.
8
1 Using Emulation
Advertisement
Table of Contents
