To Eject All Jobs in the Printer
Print all jobs that the printer has received.
Through this procedure, you can interrupt the receiving of data and empty the buffer. The
procedure is explained below.
1.
Press the <Online> button when the display
shown to the right appears.
Note
• Pressing the <Online> button to make the printer
automatically stop receiving data.
2.
Press the <Eject/Set> button. This starts
printing.
When all jobs are executed and printed, the
display changes to "Off-line".
Note
• When a parallel interface or USB interface is being
used, depending on when the <Online> button is
pressed in step 1, data reception may occur in the
middle of a job. In this case, after the <Eject/Set>
button is pressed, and processed like a new job after
releasing offline in step 3.
3.
Press the <Online> button.The display
changes to "Ready to print".
Note
• After "Ready to print" appears, the data that is being
processed as a new job may not be printed correctly if
[Print Mode] is set to [Auto] in the common menu.
10
1 Using Emulation
<Online> button
<Eject/Set> button
<Online> button