Remaining Battery; Guidelines For Number Of Recordable Pictures And Operating Time - Panasonic Lumix DMC-LZ30 Owner's Manual

When you insert new batteries, one of the following messages will be displayed.
• [To use alkaline battery (LR6)]
• [To use nickel metal hydride battery]
If the type of new batteries is different from that indicated in the message, change the
setting of [Battery] (→46) in the [Setup] menu.

Guidelines for number of recordable pictures and operating time

The number of recordable pictures or available operating time may vary according to
surrounding environment and usage conditions. Figures may be reduced if flash, zoom,
or other functions are used frequently, or in colder climates. (→19)
■
Recording still pictures (By CIPA standard)
Number of
recordable pictures
Recording time
●
Recording conditions by CIPA standard
CIPA is an abbreviation of [Camera & Imaging Products Association].
• [Program AE] Mode
• Temperature: 23 °C (73.4 °F)/Humidity:
50%RH when LCD monitor is on.
• Using a Panasonic SD Memory Card
(32 MB).
Number reduced if intervals are longer (e.g. to approx. one quarter for 2-minute
intervals under the above conditions).

Remaining battery

Remaining battery
If the battery mark flashes red, replace the batteries with new
ones.
Supplied batteries or optional
Panasonic alkaline batteries
Approx. 380 pictures
Approx. 190 min
- 17 -
Inserting and removing the batteries
(flashes red)
Fully-charged Panasonic Ni-MH
batteries (optional, when the
battery capacity is 1900 mAh)
Approx. 540 pictures
• Starting recording 30 seconds after the
camera is turned on (when the Image
Stabilizer function is set to [ON]).
• Recording once every 30 seconds with full
flash every second recording.
• Rotating the zoom lever from max. Tele to
max. Wide or vice versa in every recording.
• Turning the camera off every 10 recordings
and leaving it until the temperature of the
batteries decreases.
Approx. 270 min
VQT4V99