Gigabyte GA-M61PME-S2 User Manual page 41

Am2 socket motherboard for amd athlon 64 fx processor/ amd athlon 64 x2 dual-core processor/ amd athlon 64 processor/amd sempron processor
Hide thumbs Also See for GA-M61PME-S2:
Table of Contents

Advertisement

USB Resume from Suspend
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the
installed USB device. (Default: Enabled)
Power-On by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Day of Month Alarm:
in a month.
Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal
of the AC power, or the settings may not be effective.
HPET Support
Enables or disables High Precision Event Timer (HPET) for Windows
(Default: Enabled)
HPET Mode
(Note)
Allows you to select the HPET mode for your Windows
mode when you install 32-bit Windows
Windows
Vista
®
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the 5VSB lead.
Disabled
Double Click
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: you need an ATX power supply providing at least 1A on the 5VSB lead.
Disabled
Password
Any KEY
Keyboard 98
KB Power ON Password
Set the password when Power On by Keyboard is set to Password. Press <Enter> on this item
and set a password with up to 5 characters and then press <Enter> to accept. To turn on the
system, enter the password and press <Enter>.
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press
<Enter> again without entering the password to clear the password settings.
AC Back Function
Determines the state of the system after the return of power from an AC power loss.
Soft-Off
Full-On
(Note)
Supported on Windows
Turn on the system at a specific time on each day or on a specific day
(Note)
. (Default: 32-bit mode)
®
Disables this function. (Default)
Double click on left button on the PS/2 mouse to turn on the system.
Disables this function. (Default)
Set a password with 1~5 characters to turn on the system.
Press any key on the keyboard to turn on the system.
Press POWER button on the Windows 98 keyboard to turn on the system.
The system stays off upon the return of the AC power. (Default)
The system is turned on upon the return of the AC power.
Vista
®
®
®
Vista
; select 64-bit mode when you install 64-bit
®
®
operating system only.
- 41 -
Vista
®
®
Vista
operating system. Select 32-bit
®
operating system.
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents